Scrap Tape Cutting SMT Line Equipment Automatic For Pick And Place Machine

Smt Splice Cutter Scrap Tape Cutting Machine For YV100Xg YS12F YAMAHA Pick And Place Machine

The SMT automatic tape cutting machine completely replaces manual operation and realizes the function of cutting tapes and films with good effect . It cuts the waste tapes recycled inside the SMT tape cutting machine. The cut tapes and films fall into the SMT automatic tape cutting machine. The tape cutting machine comes with a vacuum anti-static recovery box to facilitate centralized processing by the operator. The machine adopts the operating mode of upper moving knife and lower positioning, which completely solves the problem of traditional tape cutting machines using scissor-type cutting due to excessive tape or adhesive that causes jamming or continuous cutting.

This not only gives employees a good working environment, but also better demonstrates the company's good 5S management capabilities, saves labor costs, and realizes intelligent operations.

The machine features:

1.This model of smt automatic tape cutting machine is suitable for SMT with a variety of materials, from the thick 0.05mm film to the 1.5mm band can be easily cut;;

2.Patent (patent number ZL201520023125.6) equipment beautiful, small footprint, Conviniently to use and storage.

The specific size can according to the customer the feeder under custom recovery area.

3. The blade material: imported SKD-11, guaranteed for one year without sharpening.

4.The patent (Patent No. ZL201530007763.4) rolling cutter cutting system, When cutting on the cutter bottom eight spring tension in the cutter edge plane and tangent point contact. To solve the shortcomings of the common market under the knife to cut the blade wear faster, where our shear belt machine warranty for two years (including blade), four knife can be turned to use, can be repeatedly grinding cutter. At the same time, it completely solves the phenomenon that the traditional belt shears use the knife blade to cut back and forth frequently.

5. Microcomputer intelligent control, cutting time and length can be set. One button start / stop, easy to operate.

6. With waste recycling safety sensor, when the material box off the device to stop working automatically, It can prevent employees from hand from the bottom of the device tool work area to ensure the safety of equipment. Ensure the pure shearing after all fall into the recovery box at the same time.

7. The machine shear stroke two ends limit limit switch, beyond the trip power outage. To prevent the photoelectric switch failure after the tool out of the limit motor has been working, burned motor caused short circuit situation.

8. The machine warranty for one year, permanent after-sales service.

Detail picture

Who We Are ?
Shenzhen Honreal Technology Co.,Ltdis a national high-tech enterprise,Specializing in smt equipment research and development, production, sales. Services for the world´s top 500 electronic companies.The registered capital of the company is 5 million.Havingexperienced technical team andexcellent technical innovation ability, Creating a better product supply chain and service team and meeting different customer needs is our long-term goal. We will meet customer needs by understanding customers, putting them first and providing valuable services.