Application
The machine is a fully-automatic forming-sealing-packaging machine,
and is applicable for packing butter,ketchup, sauce etc.
Features
- Main part of the machine is made of stainless steel, that greatly
improves the corrosion resistance of the equipment.
- Modular moulds are applied that can be replaced easily and the
machine can be used for multiple purposes.
- Both thermoforming mould and sealing mould are equipped with water
cooling system.
- German BUSCH vacuum pumps with high extreme degree of vacuum and
performance are fitted.
- OMRON PLC, touch screen & servo motor are used with reliable
performance and ease of operation.
- Schneider or ABB protection relay & air switch are with long
service life and good application.
- With special holding chains, the packaging machine is applicable
for extending and moulding of flexible film or rigid film of
different thickness for special purpose packaging.
- With advanced punching cutting systems, the machine’s replacement
operation is more convenient.
- There is a scrap and waste recycling system to help maintain
environmental cleanness.
Technical Specification
- Power supply: 380V/AC 50HZ three phase + neutral line.
- Upper packing materials: heat-sealable films.
- Lower packing materials: thermo-formable, heat seal film, rigid
film is available.
- Gas displacement of vacuum pump: 180m3/hour (thermoforming: 80m3/h,
sealing: 100m3/h).
- Power consumption of the machine: 10KW.
- Compressed air consumption: 1m3/min.
- Applicable gas pressure: 0.6Mpa.
- Pneumatic consumption: 800-1000L/min, 6 bars
- Cooling water: 4 liter/min.
- Maximum upper film width: 380mm.
- Maximum lower film width: 390mm.
- Practical film width: 338mm.
- Length per mould: 175mm.
- Maximum drawing depth: 21-40mm (thermoforming depth depends on the
tray size and film material).
- Loading area: standard 1 meter, additional(optional)
- Packing capacity: 6 cycles/min.
- Control system: PLC programmable operation display(OMORON).
