Active Member
|
[China]
Address: Floor 4th. Building 2, No. 2 of North 3 Road Tingshan Plaza, Houjie Town, Dongguan City, 523962, Guangdong Province, China
Contact name:Marco Yang
Dongguan Cableforce Electronics Co., Ltd |
|
|
Connector Technical Data | |||||||||
Model Number | MC04C1LCSSB16CK10 | ||||||||
Connectors No. | 3+PE (4Pin) | ||||||||
| Contact | Brass | ||||||||
| Rated Voltage | 630V AC | ||||||||
| Impulse Voltage | 5000V | ||||||||
Wire Gauge | 1.5mm²(AWG 16) | ||||||||
Termination | Crimping | ||||||||
Insulation Resistance | ≥100MΩ | ||||||||
Contact Resistance | ≤5mΩ | ||||||||
Contact Carrier | PA66 + GF | ||||||||
Pollution degree | 3 | ||||||||
Protection Degree | IP67,IP68 | ||||||||
The M coding also supplies 5 and 6 pos. consumers with up to 8 A and 690 V.
The T and L codings are used for low voltage DC applications, such as supplying power to distributed IO modules or DC motors. The 4 pos. L coding is available with an additional functional ground contact as an option. Up to 16 A can be transmitted at a voltage of 63 V.
● IP67 IP68 IP69K and UL approvals
● Customized cable length with PUR PVC LSZH Ethernet Profinet
● Anti-vibration locking screw design
● Sturdy metal coupling screws with anti-vibration design, 48 hours
Salt Spray Test
● Application : Sensors, Actuators, Encoders, Servo motors
● Temperature Range: Dynamic -25 ~ 80℃, Static: -40 ~ 80℃.
● RoHS, REACH compliant.
FAQ
● What is the M12 power code on a motor?
The M12 POWER S, K, and M codings are designed for AC applications such as the power connection of a three-phase motor. The M coding also supplies 5 and 6 pos. loads with up to 8 A and 690 V.
● What is M12 Ethernet?
The M12 four pin plug connector with D coding has already been defined as an Industrial Ethernet standard according to IEC 61067 2 101 Amendment 1. PNO also supports the use of this connector type and has included it within its Profinet cabling specifications alongside the RJ45 push-pull connector.
● What is EMI shielding?
EMI Shielding in electronic devices and equipment is the use of manufacturing techniques and materials to protect signals from being disrupted by external electromagnetic signals as well as preventing generated signals from interfering with surrounding components.
