Shanghai LTC Compressor Co.,Ltd |
|
Laser Cutting Screw Type Compressor 15kw 20hp Variable Frequency
8bar 13bar 15bar
The biggest advantages of permanent magnet frequency
conversion screw machine is high energy efficiency.
It is equipped with a permanent magnet high efficiency motor. The
permanent magnet motor combined with the vector frequency
conversion technology can maintain high energy efficiency even at
low speed.
Besides, The variable frequency startup of the permanent magnet
variable frequency screw machine has little impact on the power
grid of the entire factory. So the maintenance cost of the
permanent magnet variable frequency air compressor is reduced
largerly.
Technical Parameters:
Model |
KW |
HP | Air Delivery (m³/min) |
Weight (KG) |
Dimension(mm) (L*W*H) |
Outlet Diameter |
Noise dB(A) | |||||
7bar | 8bar | 10bar | 12bar | 13bar | 16bar | |||||||
LFSL-10 | 7.5 | 10 | 1.2 | 1.1 | 0.95 | 0.8 | 0.7 | 0.6 | 350 | 1400*650*1500 | G3/4° | 62±2 |
LPML-10 | 7.5 | 10 | 1.2 | 1.1 | 0.95 | 0.8 | 0.7 | 0.6 | 350 | 1400*650*1500 | G3/4° | 62±2 |
LFSL-15 | 11 | 15 | 1.65 | 1.53 | 1.32 | 1.10 | 1.05 | 1.00 | 550 | 1800*850*1650 | G3/4° | 63±2 |
LPML-15 | 11 | 15 | 1.65 | 1.53 | 1.32 | 1.10 | 1.05 | 1.00 | 550 | 1800*850*1650 | G3/4° | 63±2 |
LFSL-20 | 15 | 20 | 2.25 | 2.03 | 1.62 | 1.55 | 1.35 | 1.2 | 600 | 1800*850*1650 | G3/4° | 63±2 |
LPML-20 | 15 | 20 | 2.25 | 2.03 | 1.62 | 1.55 | 1.35 | 1.2 | 600 | 1800*850*1650 | G3/4° | 63±2 |
Why choose LTC Compressor's All In One design tank mounted screw
air compressor?
1.Intelligent PLC Control System
Realize the remote control of the screw compressor.
2.Efficient Screw Airend
High-precision twin-screw rotor, triple-glazed, less wearing parts,
compact structure, large air delivery, high stability.
HANBELL or BAOSI brands are available, both high quality air end in
China.
3.High-Precision Filters
Ensure clean air, prolong the life of the screw airend, extend
maintenance cycle.
4.Air Receiver Tank
Large capacity, energy saving, thickened material, cushioning,
cooling, water removal, pressure stabilization.
5.Oil and gas separator
It adopts a huge oil and gas separator. After a three times' deep
bed filtration, the oil volume is less than 3ppm and the pressure
loss is only 0.02Mpa. With the reduction of oil mist exhaustion,
the running cost of downstream equipment is increasingly lessen.
Advantages of Frequency Conversion Screw Air Compressor:
1. Start without impact:
The frequency converter itself includes the function of a soft
starter, the maximum starting current is within 1.2 times of the
rated current, and the power frequency starting is generally more
than 6 times of the rated current, and the starting impact is very
small. This impact is not only on the grid, but also on the entire
mechanical system.
2. Low noise:
The working conditions of the frequency conversion system are
mostly lower than the rated speed, the mechanical noise and wear of
the main engine are reduced, and the service life is extended;
3. Air pressure stability:
The frequency conversion screw air compressor uses the stepless
speed regulation characteristics of the frequency converter to
start smoothly through the controller or the PID regulator inside
the frequency converter. In the case of large gas fluctuations, it
can quickly adjust the response;
Main products:
•Rotary Screw Air Compressor(7.5KW~220KW)
•PM VSD Screw Air Compressor(7.5KW~160KW)
•Combined Screw Air Compressor System for Laser
cutting(7.5KW,11KW,15KW)
•Two Stage PM VSD Screw Air Compressor(15KW~200KW)
•Low Pressure PM VSD Screw Air Compressor(7.5KW~132KW)
•Medium Pressure PM VSD Screw Air Compressor(11KW~250KW)
•Oil Free Water Lubrication Screw Air Compressor(7.5KW~250KW)
Machine Image:
Factory&Warehouse:
Other Recommended Products in LTC Compressor:
FAQ
1.Why customer choose us?
Shanghai LTC Compressor Co., Ltd specializes in Rotary Screw Air
Compressor, integrating R&D, production, sales and service.
High-level quality control and years of exporting experience help
us win trust and loyalty of our customers around the world. Warmly
welcome your inquiries and orders for quality test, more favorable
sales conditions will be provided to support you expand local
market if long-term partnership can be established.
2.Are you a manufacturer or trading company?
We are a professional manufacturer in China with over 25 years
experience in air compressing solutions. We have 2 factories in
Shenzhen, and our overseas business department is in Minhang
district , Shanghai. OEM&ODM service is accepted.
3.What’s your delivery time?
For standard machines, we can deliver within 3-5 days. For
customized machines or urgent orders, please contact our sales in
advance.
4.How long is your air compressor warranty?
One year for the whole machine and two years for screw air end,
except consumable parts such as air filter, oil filter, oil
separator and precise filter elements.