Active Member
|
[China]
Address: 3 and 4 F, No.2 Building, 598# Guanghua Rd, Minhang District, Shanghai-201100, China
Contact name:Kathy
Shanghai LTC Compressor Co.，Ltd |
|
|
Twin Screw Compressor Direct Driven Laser Cutting Energy-Saving 8bar 16bar
Screw driven air compressor of LTC Compressor is more popular than pistion air compressor because of the less consumable parts, long lifespan of the compressor, easy to operate and maintan, high stability and reliability.
As the increasingly wide application of laser cutting machine, the combined screw air compressor for laser cutting is getting more and more popular among laser cutting industry. LTC Compressor developed our own air compressor for laser cutting with large capacity air tank, efficient cold dryer, precise filters, ready to use, no need installation, easy to operate, it is the most hot sell product in LTC Compressor.
OEM service is also accepted if you have large order quantity. LTC Compressor's sales and technical team will always be here at your service.
Technical Parameters:
Model |
KW |
HP | Air Delivery (m³/min) |
Weight (KG) |
Dimension(mm) (L*W*H) |
Outlet Diameter |
Noise dB(A) | |||||
| 7bar | 8bar | 10bar | 12bar | 13bar | 16bar | |||||||
| LFSL-10 | 7.5 | 10 | 1.2 | 1.1 | 0.95 | 0.8 | 0.7 | 0.6 | 350 | 1400*650*1500 | G3/4° | 62±2 |
| LPML-10 | 7.5 | 10 | 1.2 | 1.1 | 0.95 | 0.8 | 0.7 | 0.6 | 350 | 1400*650*1500 | G3/4° | 62±2 |
| LFSL-15 | 11 | 15 | 1.65 | 1.53 | 1.32 | 1.10 | 1.05 | 1.00 | 550 | 1800*850*1650 | G3/4° | 63±2 |
| LPML-15 | 11 | 15 | 1.65 | 1.53 | 1.32 | 1.10 | 1.05 | 1.00 | 550 | 1800*850*1650 | G3/4° | 63±2 |
| LFSL-20 | 15 | 20 | 2.25 | 2.03 | 1.62 | 1.55 | 1.35 | 1.2 | 600 | 1800*850*1650 | G3/4° | 63±2 |
| LPML-20 | 15 | 20 | 2.25 | 2.03 | 1.62 | 1.55 | 1.35 | 1.2 | 600 | 1800*850*1650 | G3/4° | 63±2 |
Key Product Features:
1.High Efficiency Permanent Magnet Motor
Protection class IP54, insulation class F high protection, high
precision, adjustable, low noise, low vibration, stable operation.
2.Smart Inverter
Intelligent frequency conversion start, stable air pressure, start
without impact.
3.Efficient Screw Airend
High-precision twin-screw rotor, triple-glazed, less wearing parts,
compact structure, large air delivery, high stability.
4.Intelligent PLC Control System
Record equipment operating status, automatically remind equipment
repair and maintenance, automatic fault alarm shutdown protection,
real-time intelligent detection of compressor status.
5.Electric Control System
Using silver contacts to prolong the life of the system, circuit
protection, stable operation of the equipment, prevent excessive
unloading of the compressor, and save energy consumption.
6.Cooling System+Oil and gas separation system
Adopt high-pressure cooling system, high heat dissipation
efficiency
High oil and gas separation efficiency, reliability, durability,
reasonable structural design, and more convenient maintenance.
7.Intake Valve Assembly
The air intake valve can automatically adjust the air volume from 0
to 100% according to the requirements of the system air volume, and
the pressure loss is small.
Air Compressing System Packages:
1. Screw air compressor
2. Air Receiver tank
3. Cold dryer
4. Precise filters
Machine Image:
Factory Overview:
How long does the air compressor need to be maintained?
1. 500 hours: When the air compressor runs for 500 hours, the oil filter element and air compressor lubricating oil should be changed for the first time after the new machine is used. Remove the air filter for cleaning and blow it out from the inside out with low pressure compressed air. Do not blow air from the outside to the inside to avoid clogging.
2. 2000 hours: When the air compressor runs for 2000 hours, check whether the pipe joints, bolts and terminal screws are loose, and tighten them if any. Replace the "three filters and one oil". Check all solenoid valves and whether the protection differential pressure switches operate normally.
3. 6000 hours: When the air compressor runs for 6000 hours, check the cooler and clean it if necessary; check the action and moving parts of the intake valve, and replenish or replace the motor grease. Clean the motor and fan motor, and clean the auto drain valve. Check minimum pressure valve and transducer, and calibrate relief valve.
4. When the air compressor runs for 20,000 hours, it is necessary to overhaul the head of the air compressor, replace the body bearing and oil seal, and adjust the clearance. The insulation of the measured motor should be above 1MΩ
FAQ
1.Why customer choose us?
Shanghai LTC Compressor Co., Ltd specializes in Rotary Screw Air
Compressor, integrating R&D, production, sales and service.
High-level quality control and years of exporting experience help
us win trust and loyalty of our customers around the world. Warmly
welcome your inquiries and orders for quality test, more favorable
sales conditions will be provided to support you expand local
market if long-term partnership can be established.
2.Are you a manufacturer or trading company?
We are a professional manufacturer in China with over 25 years
experience in air compressing solutions. We have 2 factories in
Shenzhen, and our overseas business department is in Minhang
district , Shanghai. OEM&ODM service is accepted.
3.What’s your delivery time?
For standard machines, we can deliver within 3-5 days. For
customized machines or urgent orders, please contact our sales in
advance.
4.How long is your air compressor warranty?
One year for the whole machine and two years for screw air end,
except consumable parts such as air filter, oil filter, oil
separator and precise filter elements.
5.How does your factory do regarding quality control?
International leading processing equipment and advanced
manufacturing technology ensure LTC screw compressor with high
efficiency, low noise, low power consumption, high reliability.
6.How long is the lifespan of your air compressor?
Generally, more than 10 years.
7. What's price term?
FOB, CIF, EXW, all are available, according to your requirements.
We have long-term cooperative shipping agent in sea shipping, much
more professional and can help you save shipping cost.
8. What's payment term?
T/T, L/C, D/P, Western Union, Paypal, Credit Card, and etc. Also we
could accept USD, RMB, Euro and other currency.
9.How about your after-sales service?
(1) Installation and commissioning online instructions.
(2) Well-trained engineers available for overseas service.
(3) Worldwide agents and after-sales service available.
