Home Companies Guangzhou Ruihe New Material Technology Co., Ltd

High Yellowing Resistance Body Safe Silicone Rubber For Patients Health

Guangzhou Ruihe New Material Technology Co., Ltd

Contact Us

[China] country

Trade Verify

Address: No.117 Fengshen Avenue, Xiuquan Street, Huadu District, Guangzhou,China

Contact name:Jacky

Inquir Now

Guangzhou Ruihe New Material Technology Co., Ltd

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

High Yellowing Resistance Body Safe Silicone Rubber For Patients Health

Country/Region china
City & Province guangzhou guangdong
Categories Nitrile Rubber
InquireNow

Product Details

 

High Yellowing Resistance Liquid Silicone Rubber For Medical Grade Fantastic Durability For Patients' Health

 

 

 

Description

 

Our 6250-50YH liquid silicone rubber is a two-component material, and the silicone rubber includes Part A base silicone and Part B curing agent. The Part A base silicone and Part B curing agent can cure at room temperature by an addition reaction, it can be heating during the action, the higher temperature, the faster curing. All LSR are platinum cured (vulcanized) materials which are mixed in a 1: 1 ratio by weight.

 

 

Typical Properties
     

RH 6250-50YH

Appearance

translucent

Viscosity(Ma.s)

1600000-2200000

Density (g/cm3)

1.12 ± 0.02

Shore A Hardness(A)

50 ± 3

Tensile Strength(MPa)

≥ 8.0

Elongation at break(%)

≥ 550

Tear Strength(KN / m)

≥ 25

Linear Shrinkage(%)

≤ 0.1

Tensile set (%)

≥ 1.7

Rebound (%)

≥ 50

Compression set((22 hrs at 175℃) %

≤ 35

These figures are for reference only, please contact us for details.

 

 

The mixing ratio of components A: B = 1: 1.

Vulcanization: 150 °C / 5 min

 

 

 

 

 

 

Instructions

 

Here is a look at the LSR molding process:

 

1. LSR A + B components typically come in a 5-gallon pail or 55-gallon drum. A process controlled pumping kit presses down on the buckets to force the material into the static mixer and feed into the injection unit.

 

2. Then, streams of pigment can be added and controlled. In the injection, press material will be mixed together additionally with a screw and pushed forward to create a “shot” of material, or the amount needed to fill the mold.

 

3. After the material is injected into the mold, it will then stay clamped together to cure the LSR. Then, either an operator or a robot will remove the cured product from the mold

 

 

Why choose RUI-HE?

  • difficult large parts are our specialty
  • dual hardness parts
  • rubber-to-metal bonding
  • short run capability
  • three-shift operation
  • experienced workforce
  • a wide range of rubber compounds
  • multiple packaging options for finished parts

 

 

 

 

 

 

 

Certificate

 

LSR 6250-50YH® Liquid silicone rubber obtained the following test certificate: RoHS, FDA, REACH, PAHS, ISO9001:2016, etc.

 

 

Packing & Storage

 

Available in 20kg pails or 200kg drums.

Store in a cool, dry place out of direct sunlight, use it within 12 months from the day of manufacture.

 

Notice

 

This product cannot be contacted with compounds containing N, P, S to avoid affecting the catalytic effect of platinum.

 

 

 

 

 

If you need to know the prices of our silicone rubbers, please contact us. We do not provide prices on the website because prices fluctuate for many reasons.

 

 

Hot Products

Massage Insole Healthcare Supplies Foot Care Insole Medical Grade Liquid Silicone Outstanding ...
Rapid Vulcanization Food Grade Liquid Silicone Medical Grade For Medical Bracelet With REACH ...
Rapid Vulcanization Food Grade High Tear Strength Liquid Silicone Medical Grade For Medical Bracelet ...
Food Grade Liquid Silicone Weather Resistance Medical Grade Micro-Crack Resistance For Medical ...
High Yellowing Resistance Liquid Silicone Rubber For Medical Grade Fantastic Durability For Patients...
Two-Parts Safe Grade Liquid Silicone Rubber Low Viscosity Resistance To Acid And Alkali For Oxygen ...