Horizontal Lqiuid Silicone Injection Moulding Machine Multi Section Mold Closing / Opening

Horizontal Lqiuid Silicone Injection Moulding Machine Multi Section Mold Closing / Opening

Influence of mold temperature control on the processing of silicone liquid mold

Liquid silica gel is a thermosetting material. The curing reaction of liquid silica gel injection mold occurs at the mold temperature of 120-150 ℃, and the mold temperature control is very important.

1. Mold surface temperature should be stable

If the surface temperature is too high, the products will be scorched, the parting line will crack, and the products will become brittle.

If the surface temperature is too low, the curing speed of rubber compound is slow, and the product can not be demoulded;

2. The temperature of the mould should be heated evenly

The uneven heating and large temperature difference of the mold will make the rubber flow unstable, which is easy to cause air entrapment and insufficient injection

3. Location of heater

Sufficient distance should be kept between the heater and parting line to prevent the template from warping and deformation, resulting in overflow burr of finished products;

4. Comparison of mold temperature control heating methods

1) Heating of heating rod:

The heating rod is drilled by gun drill. The gap between the heating rod and the hole will lead to uneven heat transfer, and the heating rod is easy to be damaged. Moreover, multiple groups of heating rods share a set of temperature sensing, so the damage of the heating rod cannot be detected and the mold temperature is uneven. Choose carefully.

2) Heating plate heating:

The heating plate is designed at the bottom of the mold core, which is close to the mold core. The heating plate is designed with independent temperature sensing and closed-loop design to ensure that the temperature is controllable and the temperature of the heating plate is uniform. Recommended.

LSR injection molding machine of model TYM-W4545:

Horizontal 130T direct pressure LSR injection molding machine

OUR SERVICES

Pre-sale service
According to the customer’s investment budget, plant planning and other forms of pre-sales services to ensure customer's planning is reasonable, standardized and cost-saving, will provide matched mold and select suitable machine according to customer’s requirement.

On-purchase service
Enable to be familiar with the operation and maintenance of the TYM's machine.
1) Installation of LSR machine and new machine debugging service.
2) Machine operator training.
3) Training of technicians.

After-sales service
1) Free training for the operation and maintenance independently.
2) Help to solve and reply technical problem and question timely, TYM will arrange professional engineer for the instruction and will provide the technical guidance for free.
3) TYM will give priority to customer when the system on the LSR machine need to be upgraded.