Home Companies HUBEI CHENGLI SPECIAL AUTOMOBILE CO,.LTD

Dongfeng D9 10M3 10CBM Rear Loader Garbage Compactor Truck

HUBEI CHENGLI SPECIAL AUTOMOBILE CO,.LTD

Contact Us

[China] country

Trade Verify

Address: Room 2614-2615,Block B,No. Longyang Time Square,Hanyang District,Wuhan,China

Contact name:Yang

Inquir Now

HUBEI CHENGLI SPECIAL AUTOMOBILE CO,.LTD

Verified Suppliers
  • Trust
    Seal
  • Verified
    Supplier
  • Credit
    Check
  • Capability
    Assessment

Dongfeng D9 10M3 10CBM Rear Loader Garbage Compactor Truck

Country/Region china
City & Province wuhan hubei
InquireNow

Product Details

China HOWO 18m3-20cbm Compactor Refuse Transport Trucks 6*4 Compressed Garbage Waste Collection Dustcart Truck

1- Rear Loader Garbage Truck is divided into compactor garbage truck, swing arm garbage truck, hook lift garbage truck, roll on roll off garbage truck,bin lift garbage truck,dumper garbage truck,sealed garbage truck,container garbage truck, rear load garbage truck and so on.
2--Easy Full Automatic Operation of Rear Loader Garbage Truck : computer control system for loading and unloading operations.
3--One Person Operation: Reducing sanitation working, greatly improves the working environment.
4--Double Operation System of Rear Loader Garbage Truck : computer control system and manual operation greatly improves the vehicle usage rate.
5--Capacity of Rear Loader Garbage Truck : option for 3-20m3 garbage truck,optional for loading capacity from 1ton to 16tons
6--Steering wheel of Rear Loader Garbage Truck : right hand drive or left hand drive
7--Emission standard of Rear Loader Garbage Truck : option Euro 1,Euro 2,Euro 3,Euro 4,Euro 5 rear loader truck
8--Truck chassis of Rear Loader Garbage Truck : option for japanese and chinese brand,such as dongfeng,isuzu,faw,foton,howo,jac,jmc,forland...



The main advantages of Rear Loader Garbage Truck :

1) The collection method is simple: change the dirty and old appearance of garbage cans all over the streets in the city, and prevent secondary pollution.
2) High compression ratio and large loading capacity: the maximum crushing pressure is 12 tons, and the loading capacity is equal to two and a half times of the same ton of non-compressed garbage.
3) Operation automation: Imported computer control system is adopted, and all loading and unloading operations require one driver to operate, which not only reduces the labor intensity of sanitation workers, but also greatly improves the working environment.
4) Good economy: When the special equipment is working, the computer control system automatically controls the throttle.
5) Dual insurance system: The operating system has dual functions of computer control and manual operation to ensure safety and increase vehicle utilization.
6)Turning mechanism: optional turning mechanism with trash can (or bucket), rear swing arm turning structure, large floor bucket turning structure.


 

 

Feature

1--garbage truck is divided into compactor garbage truck, swing arm garbage truck, hook lift garbage truck, roll on roll off garbage truck,bin lift garbage truck,dumper garbage truck,sealed garbage truck,container garbage truck, rear load garbage truck and so on.
2--Easy Full Automatic Operation: computer control system for loading and unloading operations.
3--One Person Operation: Reducing sanitation working, greatly improves the working environment.
4--Double Operation System: computer control system and manual operation greatly improves the vehicle usage rate.
5--Capacity of rear loader compressed garbage truck : option for 3-20m3 compressed garbage truck
6--Steering wheel of rear loader compressed garbage truck : both left and right hand drive,meet the needs of different countries
7--Emission standard of compressed garbage truck : option Euro 1,Euro 2,Euro 3,Euro 4,Euro 5 compressed garbage truck
8--Truck chassis of compressed garbage truck : option for japanese and chinese brand,such as dongfeng,isuzu,faw,foton,howo,jac,jmc,forland...

 

 

 

 


 

 

Specifications of dongfeng 4X2 10cbm 12cbm Rear Loader Garbage Truck

Drive type4X2, New condition, LHD
Vehicle Main Dimensions(L x W x H)mm8600×2500×3250
Wheel base (mm)3950,4500 or 4700
Track front/rear mm2040/1860
F/R Axle-Load4500/9000 kg,
Approach/departure angle8/12
Weight in KGSCurb Weight9850kg
GVW16000kg
Max. driving speed(km/h)98
EngineBrandCummins Brand,Diesel ENGINE
ModelB170 33 or B190 33
Type4-stroke direct injection, 6-cylinder in-line with water cooling, turbo-charging and inter-cooling;
Horse Power(HP)170hp or 190hp
Emission standardEuro III or Euro IV
Gearbox6 forwards& 1 reverse
ClutchReinforced diaphragm clutch
Tire9.00R20,9R22.5, 6 pc including 1 spare tire
Steering Gearpower steering, hydraulic steering with power assistance
Equipment for Rear Loader Refuse Truck
Garbage Box MaterialCarbon Steel Q235
Garbage Box Volume10cbm,12cbm or 14cbm
Body materialFloor plate 5mm and side plate 5mm
Waste water tank200L
Filling container volume500L
Filling time8~10s
Filling cycle time50~60s/time
Discharge time30~40s
Hydraulic SystemChinese brand,consist of oil pump,oil cylinder,front valve,rear valve,pressure gauge,oil box,filter and pipelines.Front valve controls push panel and strike-off board.
Push PanelUsed to push and squeeze garbage,works together with the skid way in the box
 

 

 

Pre sale service

--- Technical communication with engineer
--- Factory and workshop visit
--- Designed drawings

 

After Sale Service
--- Overseas installation and commissioning
--- Overseas and spare parts support
--- Technical and spare parts support

 

Truck

According to your request, choose good chassis and refit it to truck.

 

Upper Body
Supply only upper body without chassis. According to your chassis drawing,design function parts.

 

 

Customization
Communicate with engineer,making drawings and produce customized products.

 

Spare Parts
Supply all kinds of spare parts on chassis and upper body,replace main parts

on trucks as tank and box.

 

 

Q1: What kinds of garbage trucks I can order from your company?


A: There are various sizes and types of garbage trucks with different functions,you can contact us and tell your request.We will recommend you suitable product.

 

Q2:: Have you supplied garbage truck to any overseas companies?


A: Yes,with need of garbage waste transport,we offered garbage trucks to many Africa and south-east Asian countries.
 

 

Q3 What about warranty of garbage truck?


A: Equipment warranty is 12 months from the date on which the equipment is applied successfully into operation, or 13 months from the date on which the equipment has been delivered, whichever comes first.

 

Q4: Where is your factory? How far from Shanghai to your factory?


A: Our factory based in Suizhou city, Hubei province, China. Our overseas marketing office in Wuhan. Wuhan is two hours' plane from Beijing,Shanghai or Guangzhou city,welcome to visit us for factory inspection.


Contact Shirley for more details
Ms. Shirley Fu

Sales Director

Hubei Chengli Special Automobile Co., Ltd.
Hubei Weiyu Special Vehicles Co., Ltd.
Factory:Chengli Automobile Industry Park,Suizhou City,Hubei Province,China
Office:Room 2614-2615,Block B,Longyang Time Square,Hanyang District,Wuhan,China

Mobile:+86-135 4506 4324(whatsapp)

 
 

Hot Products

China HOWO 18m3-20cbm Compactor Refuse Transport Trucks 6*4 Compressed Garbage Waste Collection ...
ISUZU 600P 5cbm Compression Garbage Trucks Hydraulic Garbage Compactor Vehicle Product Description 1...
Euro 4 Diesel Engine Sinotruk Hohan 340HP 18M3 20CBM Garbage Compactor Truck For Philippines 1- ...
China HOWO 18m3-20cbm Compactor Refuse Transport Trucks 6*4 Compressed Garbage Waste Collection ...
Dongfeng 5tons Compressed Garbage Truck Waste Collection Truck Product Description The compression ...
Silent 25kw Diesel Generator Set Powered by Cummins/Deutz/Yangdong Engines Standby Use 25kVA-300kVA ...