Active Member
|
[China]
Address: ROOM#512,201 BUILDING,SHANGBU INDUSTRY ZONE HUAQIANG SOUTH ROAD FUTIAN DISTRICT SHENZHEN CITY
Contact name:lucky gong
Shenzhen Jinside Technology Co., Ltd |
|
|
Mini S20/S30 /S45m Laser Distance Measurer Instrument With One Year Warranty
Care
Do not immerse the instrument in water. Wipe off dirt with a damp,softcloth.Do not use aggressive cleaning agents or solutions. Handle theinstrument as you would a telescope or camera.
Warranty
The instrument comes with a one- -year warranty.T his warranty effectivepremise is:according to the company s operating instructions for correct operation,processing,ceaning and maintenance of the tool,and the tool is maintained good technical condition.This means that in the tool can be used in the company s original components and spare parts." This warrantyis provided in the tool during the whole life. expectancy of the defectiveparts of the repaired or replaced free of charge.If the component due tonormal wear and in need of repair of replacement,is not in the warrantyrange.
Technical data
| Model | S20/S30 /S45 m instrument |
| Measuring range | 0.05 to 20M/30M/45M* |
| Measuring accuracy | Typica 1+ 2mm* |
| Display accuracy | 1mm |
| Laser classification | Class 2 |
| Pollution degree | 2 |
| Laser type | 620-690nm, < 1mW |
| 0.16x0.6 mrad, 0.25s | |
| Area,V olume measuring | ● |
| Continuous measurement | ● |
| Show beep | ● |
| Protection against splashes and dust | IP54 |
| Temperature range for operation | 0°C ~+40°C |
| Temperature range for storage | - 20°C +70°C |
| Battery life | 5000 measurements |
| Battery selection | LR03(AAA)2X 1.5v |
| Laser switch-off automatically | After 30 seconds |
| Instrument switch-off automatically | After 3 minutes |
| Dimensions | 118X 39X 20MM |
| weight(without battery) | 70g |
| max. Operating altitude: 2000m; max.relative humidity: 0-95% | |
Laser classification Integrated distance meter
That produces a visible laser beam which emerges from the front of
theinstrument.
It is a Class 2 laser product in accordance with:
IEC608251: 2007 R adiation safety of laser products Laser Class 2
products:
Do not stare into the laser beam or direct it towards other people
unnecessarily. Eye protection is normally afforded by aversion
responsesincluding the blink reflex.
Precautions:
Only use this product as a measuring sensor, not as a control device.Y our system must be configured and operated in such a way, thatin case of an erroneous measurement, malfunction of the device or powerfailure due to installed safety measures (e.g. safety limit switch), it isassured that no damage will occur.
Target surfaces
Measuring errors can occur when measuring towardcolorless liquids
(e.g. water) or dust free glass, Styrofoam or similar semipermeable
surfaces. Aiming at high gloss surfaces may deflect the laser beam
and lead to.measurement errors.Against non-reflective and dark
surfaces the measuring time may increase.
- If the equipment is used in a manner not specified by the
manufacture,the protection provided by the equipment may be
impaired.
- This equipment contains no operator serviceable parts, serviced
by thequalified person only.
- Must be consulted this manual in all caseswhere symbol,is marked.
