Important Quality Control
* Follow IEC60601 Safty Standard
* American motor, with UL/ROHS/EN approval. Noise under 50dB, with
lifetime 20,000times movement.
* Three position braking systerm, transporting can maintain a
straight line
* Motor protection:
* The elevators are equipped with electric protection against
overload, therefore the bed will automatically stop when an
elevator is overloaded.
* Once the overload is removed, the bed can continue to work
without interference.
* One-button emergency stop switch can quickly stop all going
movement
* Use the GO button to activate the bed; protects the patient
against an injury caused by any unintentional movement of the bed.
* Control system is automatically locked after 3 min
* Respects easy patient mobilisation:
* One-button for patient mobilisation position -back plate raised,
double hole design on back part guardrail, which supports
patient self standing
* CPR emergency reset handle to immediately flatten the bed back
part; located on both sides of the bed.
* Electric CPR button is setted inside control panel and nurse
control panel,one button to make the back plate flat.
* The position of the cardiac chair can be easily adjusted by using
a single button to maximise the respiratory function and
cardiac output.
* One button nursing operating position: 800mm, helping the nurse
to give fast treatment in a very comfortable height
* One button trendelenburg position, helping the quickest rescue
performance
* The lowest position indicator design allows the medical staff to
observe the bed safe position during night or long distance; green
light indicate lowest bed height
* Backrest adjustment
* Thighrest adjustment
* Auto-contour
* Height adjustment
* Reverse Trendelenburg
* Trendelenburg
* Bed extension
* X-Ray translucent bed surface
* Auto-regression
* Cardiopulmonary resuscitation
* Applicable for C-arm examination
* Controls in the siderails: Numerous studies have shown that the
built-in controller located in the head guardrail is easier to
reach, allowing the patient to adjust the basic position of the bed
through the controller. (optional)
* Handheld controller for patients and nurses, ergonomic design.
Built-in LED torch, backlit keyboard design for night use
* Satellite control panel for nurse: flexible spiral cable for easy
mobility and operation in optimal position. The nurse can
control all standard functions and automatic chair position. This
panel is an optional accessory.
* Patented design Detachable head & foot board, using the
eccentric locking structure, one step quick removable
* Horizontal corner bumpers at the outermost periphery of the bed
to protect the bed and wall
* Patent angle indicator,clearly show back-rest and tredelenbug
position
* extended bed platform up to 20CM, comfortable for the tallest of
patients (option)
* JOINT-FREE TECHNOLOGY
* Removable plastic covers formed from 9 removable blow moulded
lamella to minimise the slots where unwanted infections may hide.
* 5th and 6th extra side rail, for 100% fully protection
* The double-folded large-area rubber design, horizontal and
vertical two-sided rubber, allows the nurse to touch the brakes
when the soles of the feet are soft and large-area plastic surface,
saving effort and protecting the upper.
* Castors with TPR tire, no worn-out after running 30KM, united
forming without bolts
* Pass Dynamic test: Bearing 120kg run 30KM and pass obstacles
500time
* Plastic drainage hook, movable
* Full SS IV pole, bearing 5kg
* Soket on side rail for placing the patient cellphone or glasses
* Back rest 30degree position - help nurse to observe the bed
position from distance, many research shows 30degree position will
max. reduce the chance of lung infection.
* Mattress, weighing system
* Ergoframe® against pressure ulcers
* Easy mobilisation
* Available with
* a number of controls
* Soft drop function
* Easy clean concept
* Safety features such as the
* Extender or Protector
* Low TCO – total cost of ownership
* Universal bed for a low price
* Overload protection
* Baosteel® from Fortune Global 500 company
* Environmental plastic can be sterilized in 100°C,tensile upto
30MPa
* 11 Process epoxy painting, ASTM testing anti-baterial, paint
thickness 0.12mm, brightness 60°, paint can resist 50kg impact
* Panasonic Robotic ensure
* 360° full smooth wedlding