Large Capacity Tri - Lobe NBR Rotor Lobe Pump For Sewage Treatment

Large Capacity Tri-Lobe NBR Rotor Lobe Pump For Sewage Treatment

Accuvon rotary lobe pumps

Our customer who is from Sewage treatment plant.has the construction scale of the water quality reformation project of 300,000 m3/d. The water plant sludge is collected through the sludge pool, and the mechanical concentration and dehydration are used to concentrate and transport

Accuvon rotary lobe pumps can effectively transport sludge with a solid content of 3-6% for a long time.We add axial wear-resistant protective lining plates to the pump to effectively protect the pump shell.When the medium is severely worn in the equipment,it only needs to replace the wear -resistant lining plate, which saves the cost of equipment maintenance in the later stage.The rotor uses NBR coated rubber,which also has abrasion resistance.

Technical Date:

Construction

1. The quick-release cover

Access to all wetted parts by simply loosening four ring nuts – maintenance without removal of pipe or drive systems.

2. The rotors

Large selection of high-quality rotors for almost pulsation-free pumping of the medium.

3. The casing protection

Depending on its size, the pump is available with and completely without protection plates and liners. When pumping abrasive media containing solids, the protection plates and liners protect the pump casing from wear and can be replaced in a matter of minutes.

4. The intermediate chamberand shaft seal

The large-volume quench chamber is oil-filled and ensures the highest degree of safety. The ideal mechanical seal is selected depending on the medium.

5. The carrier and timing gear

The high-quality and maintenancefree carrier and timing gear guarantees a smooth and even operation of the rotors. The result is a long service life of the pump.

Advantages

• High degree of operational safety due to double-acting mechanical seals

• Steel rotors with screw profile for low pulsation

• Pump is permanently technically tight

• Pressure-resistant

• Almost pulsation-free pumping

• Pumping of highly viscous media

• Ease of maintenance with MIP (Maintenance in Place)

• Resistant to solids

• High efficiency with pressures of up to 25 bar

• Pump speed can be adapted to the viscosity of the medium

• Short-term dry-run capability

• Pressurized, double-acting mechanical seal

• Self-priming

• Flexible flow rate

• Short-term dry-run capability

• Pumping of highly viscous media

• Pump made of stainless steel

• Quick emptying of tank

• Chemically highly resistant materials

• Small footprint

• Reversible

• Variable speeds

• Changing the rotors in a few minutes

 
Testing Photo