|
[China]
Trade Verify
Address: No. 98, YanshaRoad, Nanpu, Luopu street, Panyu District, Guangzhou
Contact name:Demi Liu
Accuvon (Guangzhou) Pumps Co., Ltd |
|
Verified Suppliers
|
|
|
High Efficiency Tri-Lobe Screw Rotor And Save Energy Lobe Pump
Accuvon rotary lobe pumps
Accuvon is a specialist in rotary lobe pumps. We offer solids-resistant rotary lobe pumps with flow rates of 1–24,000 l/min and a large selection of equipment and additional parts. The pumps can be used as mobile, stationary or submerged versions.
Working principle:
ACCUVON lobe pumps basically consist of two lobe rotors, which rotate synchronously driven by a pair of synchronous gears in the gearbox. The rotors are driven by the main shaft and sub-shaft to rotate in a synchronous reverse direction, which changes the pump capacity, builds up high vacuum and discharge pressure, thus an efficient pumping is formed. Gap is kept between the rotors and between the pump casing, no friction, long life, no damage, no physical and chemical reaction to the pumped products.
Technical Date:
| Product Name: | Sludge Lobe Pump |
| Material: | GG25 Pump housing,Tri-lobe screw NBR rotors |
| Seal Material: | SIC/NBR |
| Max. Flow: | 20 m3/h |
| Max.pressure: | 1.8 Mpa |
| Speed | 300 RPM |
| Rotor Type: | Tri lobe screw rotors |
| Mechanical seal: | Single mechanical seal |
| Motor power: | 3KW~22KW |
| Sealing option: | single mechanical seal/Double mechanical seal |
| Voltage: | 380V,50HZ |
| Motor: | XINGLING motor, WANNAN motor, others (Domestic Famous Brand) |
| connection: | Direct Flange |
| Available standard: | DIN, SMS, 3A, RJT, ISO/IDF |
| Operated: | Electric power |
| Application scope: | petrochemical industry, sewage treatment, railway vacuum discharge system, biogas energy, food waste, ship ocean, pulp and paper, food and drinks, light industry etc. |
Construction
1. The quick-release cover
Access to all wetted parts by simply loosening four ring nuts – maintenance without removal of pipe or drive systems.
2. The rotors
Large selection of high-quality rotors for almost pulsation-free pumping of the medium.
3. The casing protection
Depending on its size, the pump is available with and completely without protection plates and liners. When pumping abrasive media containing solids, the protection plates and liners protect the pump casing from wear and can be replaced in a matter of minutes.
4. The intermediate chamberand shaft seal
The large-volume quench chamber is oil-filled and ensures the highest degree of safety. The ideal mechanical seal is selected depending on the medium.
5. The carrier and timing gear
The high-quality and maintenancefree carrier and timing gear guarantees a smooth and even operation of the rotors. The result is a long service life of the pump.
Advantages
• High degree of operational safety due to double-acting mechanical seals
• Steel rotors with screw profile for low pulsation
• Pump is permanently technically tight
• Pressure-resistant
• Almost pulsation-free pumping
• Pumping of highly viscous media
• Ease of maintenance with MIP (Maintenance in Place)
• Resistant to solids
• High efficiency with pressures of up to 25 bar
• Pump speed can be adapted to the viscosity of the medium
• Short-term dry-run capability
• Pressurized, double-acting mechanical seal
• Self-priming
• Flexible flow rate
• Short-term dry-run capability
• Pumping of highly viscous media
• Pump made of stainless steel
• Quick emptying of tank
• Chemically highly resistant materials
• Small footprint
• Reversible
• Variable speeds
• Changing the rotors in a few minutes
Testing Photo
