|
[China]
Trade Verify
Address: No. 98, YanshaRoad, Nanpu, Luopu street, Panyu District, Guangzhou
Contact name:Demi Liu
Accuvon (Guangzhou) Pumps Co., Ltd |
|
Verified Suppliers
|
|
|
Durable FPM Rubber Three Lobe Rotary Piston Pump For Chemical Slurry
Product Overview
Accuvon Rubber Rotary Lobe pump are super self-priming. This positive displacement is similar to a gear pump, but the lobes don't touch each other and turn independently. Lobe pumps are utilized for transfer liquid of various viscosity and air/water mixture.
The feature a robust design (in between bearing support), that enable operation operation at high pressure and low vibration.
Intermediate isolation chamber, ensure the gearbox are isolated from medium, even if there a leak.
Built-in gear reducer is optional, for space saving.
Material: Cast iron/Cast steel/Stainless steel and various polymer.
Specifications:
| Description | Rubber Lobe Pumps |
| Rotor | Rubber Rotor |
| Seal | Mechanical seal |
| Axial and radial casing protection | High-strength steel , resistant to wear |
| Drive | Electrical Motor, Diesel Engine, Hydraulic motor |
| Material of pump | Cast iron |
| Pressure | 0-0.4 Mpa |
| Flow | 30-1950 m³/ h |
| Power | 55-315 / KW |
| Speed | 10-650 rpm |
| Rate of flow | 50 l/rev |
| Work efficiency | Up to 85% |
| Medium | High-corrosive / high-viscous / Liquid containing various media |
| Self - priming | Up to 9.5m vertical / 30m horizontal |
| Custom printing | Acceptable |
Function
Lobe pump manufacture use high precision 5-axis CNC machining. Our rotor perfectly seal with the inlets and outlets chamber, pump suction ability can reach to 9 meters. The material of the rotor can be selected according to the characteristics of conveying medium. We have many kinds of rotor material for selection, including anti-wear elastomers, hard steel, stainless steel and etc.
Our lobe pumps design is compact, can be installed in extremely limited space. The design of flange and placement of the motor can be adjusted to fit for the customer's space constraints.
Pump body choose inblock casting, the error is minimal. Body material can be cast iron and stainless steel. Chamber inside have replaceable protective liner. The liner surface can be hardened to increase wear resistance.
Our lobe pump is unilateral shaft support design, fluid chamber can be quickly disassemble. Rotors and other accessories can be replaced in a few minutes without remove the pump inlet and outlet pipes. Also lobe pump have few wearing parts, it make lobe pump lower shutdown time and lower using cost.
Very high efficiency, about 60% to 85%.
Lobe pump have wide fluid chamber, no block problem.
Lobe pump have good self-priming ability, reach to 9.5m, and can allow a certain time dry running.
Advantage
1. Rotor pump is suitable for transporting high viscosity, ensity and any medium containing particle.
2. The rotational speed is low, generally keep already existing quality not changing , any physics and chemistry properties won't be changed.
3. Stainless Steel Lobe Pump can be also called colloidal pump. All liquid flowing parts are made of stainless steel. It can transmit high viscosity, thickness and with particle medium.
4. High pressure of out let makes sure the long distance and high resisitance transportation with stable capacity used widely in food ,chemical, industrial areas .
5. Suitable temperature: -30 °C to 200 °C.
Structure features
Quality inspection photos
