|
[China]
Trade Verify
Address: Building 6, Huike Industrial Park, Roman Village,Qingxi Town, Dongguan, Guangdong Province, China
Contact name:aven
Earlisten Electronic Co,.Ltd |
|
Verified Suppliers
|
|
|
51.2V 150Ah 15KWH Stacked Home Energy Storage System With 5KW
Off-Grid Inverter
Stacked Home Energy Storage System details :
1. Diameter*Height : 603*430*950mm
2. Nominal Voltage : 51.2V
3. Nominal Capacity : 300Ah
4. Cycle life : 6000 cycles
5. Standard charging ways : CC / CV
6. With 5kw Off-Grid Inverter
7. BMS inside ,CE , UL , UN38.3 , MSDS compliant
8. Warrenty: 5 Years
Home Battery Storage System Specifications :
| Model Number | EA ENERGY V2 |
| Battery parameters | |
| Nominal Voltage | 51.2V |
| Rated Capacity | Typical 300Ah |
| Minimum 290Ah | |
| Charging Voltage | 58.4V |
| Charging Mode | C.C / C.V. |
| Voltage at end of Discharge | 40V |
| Rated Charge Current | ≤60A |
| Maximum Continuous Charge Current | ≤80A |
| Internal Impedance | ＜100mΩ |
| Rated Discharge Current | ≤200A |
| Maximum Continuous Discharge Current | ≤200A |
| Overcharge Voltage | 3.65±0.05V (Adjustable) |
| Over Discharge Cut Off Voltage | 2.5±0.01V (Adjustable) |
| Over Current | Discharge overcurrent value: ≧205A |
| Short Circuit | Detection condition |
| Release condition | |
| Operation Temperature Range | Charge: 0~55℃ |
| Discharge: -20~55℃ | |
| Storage Temperature Range | Less than 7 day : -20~65℃ |
| Inverter parameters | |
| Solar Input | |
| Maximum PV Open-circuit Voltage | 500vdc |
| PV Working Voltage Range | 120-500Vdc |
| MPPT Voltage Range | 120-450Vdc |
| Maximum PV Input Current | 18A |
| Maximum PV Input Power | 5200W |
| Maximum PV Charging Current | 80A |
| AC Input (generator / grid) | |
| Mains Maximum Charging Current | 60A |
| Rated Input Voltage | 220/230Vac |
| Input Voltage Range | UPS Mains Mode:(170Vac~280Vac)土2% APL Generator Mode:(90Vac-280Vac)±2% |
| Frequency | 50Hz/ 60Hz (Automatic Detection) |
| Mains Charging Efficiency | >95% |
| Switch Time (bypass and inverter) | 10ms(Typical Value) |
| Maximum Bypass Overload Current | 40A |
| AC Output | |
| Output Voltage Waveform | Pure Sine Wave |
| Rated Output Voltage | 230 (200/208/220/240Vac) |
| Rated Output Power | 5000 (4350/4500/4800/5000VA) |
| Rated Output Power | 5000 (4350/4500/4800/5000W) |
| Peak Power | 10000VA |
| On-load Motor Capacity | 4HP |
| Output Frequency Range (Hz) | 50Hz土0.3Hz/60Hz±0.3Hz |
| Maximum Efficiency | >90% |
| No-load Loss | Non Energy-saving Mode: ≤50W Energy-saving Mode:≤25W (Manual Setup) |
| General | |
| Humidity Range | 5% to 95%(Conformal Coating Protection) |
| Dimensions | 603*430*950mm |
| Weight | about 200kg |
| Communication mode | Working voltage, working current, remaining capacity |
Stacked Home Energy Storage System Description :
The EA ENERGY 15kwh home battery is modular in 4.8 kWh increments, providing a capacity range of 9.6kwh-38.4kWh per stack. This also allows for easy servicing and future expansion. With continuous output at up to 14.4kW, true full-home backup is here.
The system has a built-in BMS battery management system, which can
manage and monitor cell’s information including voltage, current
and temperature. What’s more, the BMS can help extend the cycle
life by balancing cells during charging and discharging.
Multiple battery stacks are allowed to be connected in parallel to expand capacity and power to meet the requirements of longer power supporting duration and higher power
Built in Inverter and Smart BMS.Save installation time and labor.
WiFi App Management Optional. Longer Cycle Life:6000 Cycle Life
@80%DOD.
Easy to move with wheels.Compact and portable design,indoor and
outdoor workable. Double input:Solar energy charging adn Utility
Grid charging.
It is a new type of solar energy storage inverter control integrated machine, which integrates solar energy storage and commercial charging energy storage and pure sine wave output.
Stacked Home Energy Storage System Features:
Single phase and split design which can meet different electricity requirements. It's mainly used in European and other countries with the same grid standard. All-In-One Design, include BMS, EMS, PCS and LFP Battery. Modulization design makes individual can move and install the product easily Personal computer On-line and Phone App monitoring, iOS/Android optional. Remote control. Multiple protection with alarm systems, safe and reliable. Can install the product wall-mounted like Tesla powerwall or ground mounted.
Lithium iron phosphate battery The lithium iron phosphate battery
(LiFePO4 or LFP) is the safest of the mainstream lithium battery
types. A single LFP cell has a nominal voltage of 3.2V. A 51.2V LFP
battery consists of 16 cells connected in series. LFP is the
chemistry of choice for very demanding applications. Some of its
features are:
Rugged - It can operate in deficit mode during long periods of
time.
High round trip efficiency.
High energy density - More capacity with less weight and volume.
High charge and discharge currents - Fast charges and discharges
are possible.
Flexible charge voltages.
Stack’d Series Features
The whole stack and each module is non-toxic, pollution-free, and
environment-friendly.
Cathode material is made from LiFePO4 with safety performance and
long cycle life.
Battery management system (BMS) has protection functions including
over-discharge, over-charge, and over-current and high/low
temperature.
The system can automatically manage charge and discharge state and
balance current and voltage of each cell.
Flexible configuration, multiple battery modules can be stacked for
expanding output and Capacity.
Adopted self-cooling mode efficiently reduces any system noise.
The module has less self-discharge, up to 6 months without charging
on a shelf, no memory effect, with excellent performance of shallow
charge and discharge.
Working temperature range is from -10 to 55℃ (14F-131F) , (Charging
0~45℃ (32-113F); discharging -10~55℃ (14F-131F) )with excellent
discharge performance and cycle life.
Small volume, light weight, plug-in embedded design modules, are
easy to install and maintain.
Stacked Home Energy Storage System Products Details :
Stacked Home Energy Storage System Applications :
The battery storage system can be applicated with solar panels
,mountain communication base station ,communication base station
energy storage ,backup power , outdoor micro station , wind power
system etc...
