Powerful Prismatic Lithium Batteries , 24V 150AH Battery Forklift
Truck
Features
- Metal housing design is fiexible
- Long life span
- LCD smart monitor
- Automatic warnning alarm
- Environmental friendly
Applications
1. General Information
This specification defines the performance of the rechargeable
LiFePO 4 battery pack GUANYU-FF054 produced by Shenzhen Guanyu
New Energy Technology Co., Ltd., and describes the type,
performance, technical characteristics, warnings and warnings of
the battery pack
2. Specification(@Battery initial Temp25±5℃)
| NO. | Items | Criteria | Remarks |
| 2.1 | Rated Capacity | 150Ah | |
| Minimum Capacity | 145Ah | |
| 2.2 | Energy | 3.6KWh | |
| 2.3 | Nominal Voltage | 25.6V | |
| 2.4 | Outgoing Voltage | ≥25.6V | |
| 2.5 | Internal resistance | ≤20mΩ | |
| 2.6 | Limited charge voltage | 29.2±0.2V | |
| 2.7 | Floating charge voltage | 27.6±0.2V | |
| 2.8 | Standard charge current | 20A | |
| 2.9 | Maximum charge current | 30A | |
| 2.10 | Standard discharge current | 150A | |
| 2.11 | Maximum discharge current | 180A/Continuous for 1 hour | |
| 2.12 | Pulse discharge current | 200A/Continuous for 15 min | |
| 2.13 | Discharge cut-off voltage | 16.0V | |
2.14 | Dimension | customizable | |
| | |
| | |
| 2.15 | Weight | Approx: 25Kg | |
2.16 | Operating Temperature | Charging:0～45℃ |
| Discharging:0～45℃ |
| Recommended operating temperature:15℃～35℃ |
| 2.17 | Self-discharge rate | Residual capacity:≤3%/ month;≤15%/years |
| Reversible capacity: ≤1.5%/ month;≤8%/years |
| 2.18 | Storage Temperature & Humidity Range | Less than 1 month:-20℃～35℃,45%RH～75％RH |
| Less than 3 months:-10℃～35℃,45%RH～75％RH |
Recommended storage environment: 15℃～35℃,45%RH～75％RH |
Long time storage: If the battery need be stored for a long time, the voltage should
be 25.6V(50%SOC), and stored in the condition as storage proposal.
It need at least one charge & discharge cycle every six months |
3. Test Conditions
3.1 Standard Test Conditions
3.1.1 Unless otherwise specified, all performance tests is required
conducted at temperature 25℃±2℃, Humidity less than 45%~75%RH.
3.1.3 Unless otherwise specified, the tested product is required
unused within two month after outgoing.
3.2 Standard Charge Mode
"Standard Charge" means at 25±2℃ charge to limit voltage with 0.33C
constant current, then charge with constant voltage until current
less than 0.02ItA.
3.3 Quick Charge Mode
" Quick Charge" means at 25±2℃ charge to limit voltage with 0.5 C
constant current, then charge with constant voltage until current
less than 0.02ItA.
3.4 Standard Discharge Mode
"Standard Discharge" means at 25±2℃ discharge to the cut-off
voltage with 0.33C current.
3.5 Quick Discharge Mode
"Quick Discharge" means discharge to the cut-off voltage with 0.5C
current.
4. Product Performance
| NO. | Items | Criteria | Testing method |
| 4.1 | Rated Capacity | 150Ah | Rest for 1 hour after fully charged, then discharge with 0.33C
current until the battery reaches the discharge cutoff voltage.
Repeat above process for three times, if the discharge time is not
less than 120 minutes, you can stop and define the Discharging
current*time value (Ah) as battery capacity. |
| 4.2 | Minimum Capacity | 145Ah |
| 4.3 | Internal resistance | ≤20mΩ | 50% battery SOC state frequency of 1 KHZ ac resistance tester |
| 4.5 | Cycle life (DOD100%) | ≥2000cycle | Discharge with the current of 0.33C until it can’t discharge, and
then rest it for 1h. Charge the battery following
CC(0.33C)/CV(14.6V) mode to full capacity, and then rest it for 1h.
Repeat above process until full charged capacity is no more than
80% of normal value. Accumulated times is defined as cycle life. |
| 4.6 | Discharge Temperature Characteristics | -20℃ | ≥70% | At 25±5℃ discharge the battery with the current of 0.33C to the
cut-off voltage and record charge capacity. Store the battery at
various temperatures for 2h and discharge the battery with 0.33C to
the cut-off voltage. |
| -0℃ | ≥80% |
| 25℃ | ≥100% |
| 55℃ | ≥95% |
| 4.7 | Charge Retention ability | Residual capacity≥80% | Charge the battery to full capacity and store it for 28days, and
then discharge it with 0.33C to the cut-off voltage. |
| Recovery capacity≥90% |
5. Protective circuit specification
The batteries are supplied with a LiFePO4 Battery Management System
(BMS)that can monitor and optimized each single prismatic cell
during charge & discharge, to protect the battery pack
overcharge, over discharge, short circuit. Overall, the BMS helps
to ensure safe and accurate running.
| NO. | Items | Content | Specification |
| 5.1 | Over charge | Over-charge protection for each cell | 3.65±0.03V |
| Over-charge release for each cell | 3.50±0.05V |
| Over-charge release method | Under the release voltage |
| 5.2 | Over discharge | Over-discharge protection for each cell | 2.0±0.05V |
| Over-discharge release for each cell | 3.00±0.05V |
| Over-discharge release method | Charging recovery |
| 5.3 | Over current | Discharge over current protection | 200±50A |
| Protection delay time | 50~150ms |
| Over current release method | Release after cutoff the load. |
| 5.4 | Short | NO. | Ban electrode short circuit |
| 5.5 | Battery temperature | Charge over temperature | Protection @55±5℃ |
| Release @45±5℃ |
| Discharge over temperature | Protection @65±5℃ |
| Release @55±5℃ |
| Charge low temperature | Protection @0±5℃ |
| Release @10±5℃ |
| Discharge low temperature | Protection @-20±5℃ |
| Release @-10±5℃ |
| MOSFET over temperature | Protection @100±5℃ |
| Release @90±5℃ |
| 5.6 | LCD Screen: | Short press a switch, light and display screen: voltage temperature
residual capacity current, light up after waiting for screen to go
out, after 60 s into power saving state (buzzer open state, the
buzzer alarm detection background), short press it again to light
up the screen. |
| 5.7 | Buzz: | Buzzer open state: SOC 10% or less, buzzer alarm, long press switch
3 s, buzzer close and screen OFF buzzer hints |
| Buzzer is turned off, when the SOC 50% or less, need to manually by
3 s starting buzzer long (SOC testing and determine whether the
alarm). |
| Buzzer is turned off, charging when the battery pack is SOC >
50%, the buzzer closed automatic reset, in an open position. |
6. Physical map
7. 4P - Air head Pin definition (main board and display):
1. The motherboard socket: Pin1 to 12V+,Pin2 to B, Pin2 to A and
Pin4 to GND.
2.The LCD panel socket:Pin1 to 12V+,Pin2 to B, Pin2 to A and Pin4
to GND.
3. Battery iron box matching LCD communication shielding line
length is about 1.5 m.
8. Transportation
* Based on the character of cell, proper environment for
transportation of LiFePO4 battery pack need to be created to
protect the battery.
* Battery should be stayed in the warehouse 15℃～35℃ where it’s dry,
clean, shade, and well-ventilated.
* The battery should be stored in 50% SOC during transportation. (The suggest method: Charge the battery fully29.2V, and discharge
the battery until reaches the discharge cutoff voltage20.0V, then
charge the battery up to 50% SOC26.4Vand storage in proper
circumstance according specification.)
* The battery need to be charged every 6 months if out of use
* Keep the battery against dropping, turning over and serious
stacking during loading.
9. Warning & Tips
Before using the battery, please read and follow the specifications
and precautions on the surface of the battery. Improper use may
cause heat, fire, rupture, damage, or capacity deterioration of the
battery. Shenzhen Guanyu New Energy Technology Co., Ltd. is not
responsible for any accidents caused by use, which does not meet
our specifications.
² The battery must be far away from heat source, high voltage, and
avoid to be exposed in sunshine for long time.
² Never throw the battery into water.
² Do not put the battery in a charger or equipment with wrong
terminals connected.
² Never connect the positive and negative of battery with metal.
² Avoid excessive physical shock or vibration. don't hit, fall,
stamp on the battery
² Without the permission of the manufacturer and guidance,
forbidden to remove or to assemble the battery
² Do not use the battery mixed with other different manufacturer,
type, or model batteries.
² Keep the battery against high temperature. Otherwise it will
cause battery heat, get into fire or lose some function and reduce
the life.
² When battery run out of power, please charge your battery timely
(≤15day).
² Please use the matched or suggested charger for this battery.
² If battery emit peculiar smell, heating, distortion or appear any
abnormity during working or storage, please stop using and take it
out from device.
² If the battery leaks and get into the eyes or skin, do not wipe,
instead, rinse it with clean water and see doctor immediately.
² Please far away from children or pets.
² Do not put disuse battery into a fire or water.
² It is strictly prohibited any series between the battery packs.
Any requirements on serials connection, please contact GUANYU for
details.
10. Battery operation instruction
10.1 Charge and discharge
10.1.1 Charging current:Do not surpass the largest charging current
that specification stipulated.
10.1.2 Charging voltage:Do not surpass the highest limited voltage
that specification stipulated.
10.1.3 Charging temperature:within temperature scope that
specification stipulated.
10.1.4 Charge with constant current, then with the constant
voltage, no reverse charge, which is dangerous
10.1.5 Special note:
Short time doesn't affect the use of the battery overcharge too,
but for a long period of time over
discharge or over charge can affect the function of the battery
failure, or the battery can't use permanent, appear serious safety
hazards, need long time floating please use the recommended
floating model specification.Battery when not in use for a long
time, because of its own self-discharge characteristics can also
cause discharge, to prevent the occurrence of a discharge, battery
should maintain a certain capacity, maintain the voltage at 50%
state of SOC.
11. Other Chemical Reaction
Because batteries utilize a chemical reaction, battery performance
will deteriorate over time even
if stored for a long period of time without being used. In
addition, if the various usage conditions
such as charge, discharge, ambient temperature, etc. are not
maintained within the specified
ranges, the life expectancy of the battery may be shortened or the
device in which the battery is
used may be damaged by electrolyte leakage. If the discharge time
is much shorter than the
normal after full charged, even battery is charged correctly, and
this may indicate it is time to
change the battery.
