Lithium Ion Polymer Battery 304045 502248 503035 602535 603030
702540 752035 801352 851735 902030 3.7v 500mah 1.85wh Lipo
BATTERY SPECIFICATION
Names | Specifications |
Type | Lithium polymer battery |
Nominal voltage | 3.7V |
Nominal Capacity | 500mAh |
Dimension | 6.0*20*46 mm |
Mode | 602046 500mAh |
Max.charge current | 1.0C |
Max.discharge current | 1.0C |
Charge current | Standard Charging: 0.5C |
Rapid charge: 1.0C |
Standard Charging method | 0.5C CC(constant current)charge to 4.2V, |
then CV(constant voltage 4.2V)charge till |
charge current decline to ≤0.05C |
Charging time | Standard Charging: 3.0 hours(Ref.) |
Rapid charge: 2 hours(Ref.) |
Discharge cut-off voltage | 2.45V~3.0V |
Operating temperature | -20°C~+60 °C |
Storage temperature | 25°C |
Weight | 10.5 g |
Application | PDA, tablet PC, e-book, MID, mine lamp, bluetooth
headset,MP3,MP4,MP5, power bank and so on. |
KEY FEATURES
- Intelligent Battery Pack Design
- Environmental Friendly Chemistry
- High Energy Density
- High Power Density
- Fast Charge Capability
- Excellent Cycle Life
BATTERY APPLICATION
- Telecommunications: Cellular phone, interphone, blue tooth
earphone, ect.
- Video Devices: MP3/MP4/MP5, digital camera, portable DVD, portable
television, electronic cigarettes, electricity sound box, ect.
- Portable Devices: GPS,PDA, E-book ,PMP, PSP, laptop, walkie-talkies
, portable medical device, etc.
- Illuminate Devices: Miner lamp, search light, ect.
- Others: Electric Toys, RC models, model aircraft, backup power,
mobile power supply, hand electric drill, ect.
INTERIOR AND EXTERIOR GALLERY
INSTRUCTION&STORAGE
1. Lithium Polymer Battery Precautions and Safety Instructions
- Guarantee to keep the battery in good repair in 12 months from the
shipment.
- Please use 0.5C current to charge up 60% capacity after the battery
placed 3 months.
- Before Use the battery, carefully read the instruction manual and
battery labels on the surface.
- Need to use the original battery charger, and should be placed in a
dry ventilated place.
- Such as long-term when not in use, the battery charger to charge
state half full, remove the battery from the device and separated,
to avoid metal contact with the battery, causing
- short-circuit or damage to the phenomenon.
- In use or during storage, battery found there has been high fever,
leakage, odor, distortion and other anomalies, please stop using it
immediately and stay away from the battery.
- Do not short-circuit the battery positive and negative, and careful
not to allow the battery to moisture, to avoid danger.
- Using, keep away from heat, High pressure place, and do not beat,
hit the battery.
- Battery end of life should be immediately removed from the
equipment, Please properly handle security of spent batteries, do
not put into fire or water.
- Shocks, high temperature, or contacts of sharp edge components
should not be allowed in battery pack assembling process.
2. Storage of Lithium Polymer Battery
- Batteries should be charged to about 30% to 50% of capacity.
- Indoor storage in cool conditions without direct sun light on the
packs or cartons.
- Store batteries in a dry location with low humidity, and a
temperature range of –20°C to +30°C.
- Long-term storage can accelerate batteries self-discharge and lead
to the deactivation of the batteries.To minimize the deactivation
effect,store batteries in atemperature range of +10°C to +30°C.
- When charging for the first time after long-term
storage,deactivation of batteries may have led to decreased
capacity.Recover such batteries to original performance through
repeating several cycles of fully charging and discharging.
- When storing batteries for more than 6 months,charge at least once
every 6 months to prevent leakage and deterioration in performance
due to self-discharging