Active Member
|
[China]
Address: 1221-1223, B3 BUILDING, WANDA PLAZA, NANSHA FREE TRADE ZONE, GUANGZHOU, CHINA.
Contact name:Grace
Guangzhou Chuxin Import & Export Co., Ltd. |
|
|
Smart 12V 15A lead acid battery charger max 14.7V CC CV charging with high efficiency
Technical Specs.:
1) Dimensions(LxWxH): 170 x 90 x 60 mm
2) Net weight: 1.5 KG
3) Max charging voltage(CV): 14.7Vdc
4) Max output current (CC): 15 amps
5) Charging method: CC, CV, floating
6) AC input voltage: 110 or 240Vac
7) AC input freq.: 50 / 60 Hz
8) AC plug: customized by user’s country
9) Output connector type: customized by applications
10) Enclosure: Aluminum
Brief Description:
Rated output 12V 15A
Max charging voltage 14V 14.4V or 14.7V
Advanced high frequency switching mode power supply technology.
DC output isolated from AC input.
Input 110 or 230Vac, 50Hz~60Hz.
Charging parameters are insensitive to the AC input line voltage variations.
Completely automatic battery charging: Pre-charging, CC, CV, Absorption, Float or Cut-off.
2 LEDs: LED1 Red (power on), LED2 Red / green (charging/full)..
Possibility to customize charging curve for request.
Protections: Short circuit, Over-voltage, Over-temperature, Reverse Polarity.
Efficiency > 95%.
Forced ventilation with fans.
100% full load burn-in test.
Aluminum casing, light weight, portable.
| Output series: 360W Size: 170×90×63 mm Net weight: 1.5 KG | ||||||
| Input | Model | Apply to battery types | Floating V | CV (V) | CC (A) | Switching |
AC Input: 110 / 230V
Frequency: 47~63HZ
| VL1220L | 12V LiFePO4 Battery | 14.6V | 20A | CC5~8% | |
| VL1220 | 12V Lead-acid Battery | 13.5V | 14.7V | 20A | CC20% | |
| VL2412LM | 24V Li-MnO2 Battery | 29.4V | 12A | CC5~8% | ||
| VL2412L | 24V LiFePO4 Battery | 29.2V | 12A | CC5~8% | ||
| VL2412 | 24V Lead-acid Battery | 27.6V | 29.4V | 12A | CC20% | |
| VL3608LM | 36V Li-MnO2 Battery | 42V | 8A | CC5~8% | ||
| VL3608L | 36V LiFePO4 Battery | 43.8V | 8A | CC5~8% | ||
| VL3608 | 36V Lead-acid Battery | 41.4V | 44.1V | 8A | CC20% | |
| VL4805LM | 48V Li-MnO2 Battery | 54.6V | 5A | CC5~8% | ||
| VL4805L | 48V LiFePO4 Battery | 43.8V | 5A | CC5~8% | ||
| VL4805 | 48V Lead-acid Battery | 55.2V | 58.8V | 5A | CC20% | |
| VL6004L | 60V LiFePO4 Battery | 73V | 4A | CC5~8% | ||
| VL6004 | 60V Lead-acid Battery | 67.5V | 73.5V | 4A | CC20% | |
| VL7203L | 72V LiFePO4 Battery | 87.6V | 3A | CC5~8% | ||
| VL7203 | 72V Lead-acid Battery | 81V | 88.2V | 3A | CC20% | |
| Note: customized input / output / plug type / connectors are available. | ||||||
Q. What charger should I choose?
A. It depends on the type of battery, the capacity of the battery,
the application and how much you are prepared to spend. Just tell
us your battery information, DANL battery charger engineer will
recommend the most suitable charger for you or customized by your
batteries and applications.
Q. Can I charge several batteries in parallel?
A. The charger has no problem whatsoever of charging or maintaining
several batteries, as long as they are connected in parallel. The
charger sees the parallel connected batteries as one large battery.
The sum of the capacity has to be below the recommendation for your
model. Please note that there could be a high current between
batteries when they are connected together, i.e. use high quality
wiring.
Q. Can you really connect and then forget about the charger?
A. That depends on your batteries state and charger’s type. Danl
lead-acid battery chargers have maintenance mode(floating mode),
charger charges with very small current at this mode, so you can
forget about the charger but not exceed 24 hours. If your battery
is lithium type and without BMS system, please don’t forget the
charger.
