Active Member
|
[China]
Address: No.2, Lane 6, Langxia New Community, Bao’an District, Shenzhen
Contact name:Aiwen
Shenzhen Linquan Technology Co., Ltd. |
|
|
Shot And Fine Wire Crimping Machine Single-end Crimping Single-end Soldering
Equipment Configuration
With the German high pixel image detection system
Equipped with high precision(Japan THK),cylinder(SMC),motor(MITSUBISHI) sensor(OMRON)
Equipment Function
1. With wire twisting,soldering flux and tin function
2. Visual inspection at A end
3. Pressure detection at A end
4. Adjust the crimping height on touchscreen
5. High speed, the maximum can reach 2800pcs/hr
Technical Parameters
| Mechine Function | Fixed length cutting,Double-ends stripping or half stripping, one-end soldering tin(twisting,with soldering flux),single-end crimping, pre-feeding function |
| Capacity | Sing-end crimping and one end soldering at about 2800pcs/hr(According to the different processing conditions,the speed will be different) |
| Drive Mode | Mitsubishi SERVO Drive, IPC |
| Wire Size | AWG30-AWG14 |
| Mould Assembly Type | Assemble AS40, AS42, AE30( Customized Acceptable) |
| Wire Cutting Length | 35-9999mm |
| Cutting Precision | Cutting length<100mm,Error range 0.5mm+(Setup cutting length*0.002) |
| Stripping Length | A 0-15.0mm;B0-17.0mm |
| Penetraction Depth | MAX 3mm |
| Crimping Capacity | 2 TON servo motor one set mute specifications |
| Detection Device | Air pressure decline, Wire exists or not, Wire overload, Terminal exists or not, Terminal overload, Stripping images detection, Terminal images detection, Pressure detection |
| Power Source | Single-phase/220V/50Hz |
| Power | 3.5KW |
| Compressed Air | 0.5Mpa |
| Equipment Size | L1480*W950*H1780mm |
| Weight | 550KG |
Details
