|
[China]
Trade Verify
Address: Fengneng Road,Huishan District,Wuxi City
Contact name:Feng
Wuxi Arta Precision Technology Co.,Ltd. |
|
Verified Suppliers
|
|
|
Does hydraulic cylinder size matter?
Absolutely, the size of hydraulic cylinders matters and is a critical factor in their performance. The size of a hydraulic cylinder refers to its dimensions, including the diameter of the cylinder bore and the length of the piston rod. Here's why size matters:
Force Output: The size of the hydraulic cylinder directly influences the force it can exert. Larger cylinders with larger bore diameters can generate more force, making them suitable for lifting heavier loads or performing tasks that require greater power.
Speed of Operation: The size of the cylinder also affects the speed at which it can move. Smaller cylinders may move more quickly, while larger cylinders may have slower but more powerful movements. The application requirements dictate the optimal balance between force and speed.
Space Constraints: Depending on the available space and the specific application, the size of the hydraulic cylinder must be chosen carefully. In some cases, compact and smaller cylinders are preferred, especially in applications with limited space.
System Design: The overall design of the hydraulic system, including pump capacity and other components, is influenced by the size of the hydraulic cylinders. Proper sizing ensures that the entire system works efficiently and effectively.
Energy Efficiency: Choosing the right size helps optimize energy consumption. Oversized cylinders may result in unnecessary energy usage, while undersized ones might struggle to meet the demands of the application.
In summary, selecting the appropriate size of hydraulic cylinders is crucial for ensuring optimal performance, efficiency, and safety in various applications. It involves a careful consideration of the specific requirements and conditions of the task at hand.
Features:
1.Proximity's signal is detected by magnetic sensing between a proximity on the surfaceof a tube and a magnet embeded in piston.
2.The position of proimity's signal is determined by the position of proximity resided on thesurface of the cylinder tube.
3.Proximity can be set and aligned easily that saves time in design and assembly.
4.Extermal dimensions of MGHC inductive cylinders are the same as HC tie-rod cylinders.
Port and ushion positions
| SD type | LA type |
Standard=A:input port B:Cushion position D:Check valve position |  |
e.g:order form for position HCA70-LA-C-100X200-B-B-A
Input port=B position
Cushion=A position
Cushion length
 | Bore(mm) | L | l |
| 32--63 | 20 | 10 | |
| 80--160 | 25 | 15 | |
| 180--224 | 30 | 27 | |
| 250 | 35 | 32 |
The application not only for production mechanical machine tools and metal
processing equipment, but also can be widely used in actuators of
steel, nuclear power plant control, passenger elevators, etc
| Type | Symbol | Drawing | With Bellow | Heat Proof | Bore(mm) |
 |
| 32,40,50,63,80,100,125,150,180,200,224,250 | |||
| Double acting | HCA |  | HCA-H | HCA-J | |
| Double rod | HCC |  | HCC-H | HCC-J | |
| Double rods with alignment | HCD |  | HCD-H | HCD-J |
HC2--A--70-- --SD--C--100--200ST-- -- -- -- -- --
1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13)
| HC2:Tie-Rod Hydraulic Cylinders | |
| 1) Type | A:doubling acting C:double rods |
| 2)Working pressure | 70:70kgf/cm² 140:140kgf/cm² |
| 3)Performance blank:(standardusage) | H:with bellow J:with heat/ erosion proof(the highest temperature is 200℃) |
| 4)Mounting type | SD/FA/FB/CA/CB/LA/LB/TA/TC |
| 5)Rod size | C: C class B:B class
note: 1standard:HC-70+C class rod
|
| 6)Bore(mm) | 32,40,50,63,80,100,125,150,180,200,224,250 |
| 7)Stroke(mm) | Max.stroke=Max length of stroke-Min. length of stroke |
| 8)Cushion blank: | no cushion
B:Cushion on bothends
R: Cushion on rod cover
H:Cushion on head cover |
| 9)Connectors Y | Y :Yconnector I:Iconnector |
| 10)Stroke alignment | only forward alignment and aligned length < or =stroke length |
11)Port position | |
| 12)Cushion position | |
| 13)Oil seal material blank | NBR(standard usage),2: PU 3:FPM |
Specifying the needed material while ordering
(1)N:NBR
(2)V:F≤200℃
| Bore | X |
| 32.40.50 | 1/3.5xstroke+45 |
| 63.80.100 | 1/4xstroke+55 |
| 125.150180.200 | 1/5xstroke+65 |
| 224.250 | 1/6xstroke+80 |
Factory:
FAQ
Q1: Are you a manufacturer or a trading company?
We have our own factory, so we can provide the best price as well
the first service.
Q2: Do you accept customization or Non-standard products?
Yes, we can customize products as the customers required.
Q3: What is your MOQ?
MOQ depends on our clients needs. Besides, we welcome trial order
before mass production.
Q4: How long is your delivery time?
Normally, the delivery time is 7 days if we have stock. If we don't
have stock, it needs 15-30 working days. And it also depends on the
quantity and requirements of products.
Q5: What are your payment terms?
T/T. If you have any questions, please feel free to contact us.
