Wuxi Arta Precision Technology Co.,Ltd. |
Verified Suppliers
|
|
Product Description
1.Working pressure: The pump can operate within a pressure range of 0.4 megapascals (MPa) to 0.6 MPa. This can also be expressed as 4 kilograms-force per square centimeter (kgf/cm²) to 6 kgf/cm². The compressed air used to filter the pump should also be within this pressure range.
2.Transmission oil: The pump is designed to work with a specific viscosity grade of
oil, which is ISO VG32 or an equivalent viscosity grade.
Working temperature: The pump can operate within a temperature
range of 0 degrees Celsius to 60 degrees Celsius.
Split out quantity: The pump can output four different quantities
of oil, which are 150cc, 110cc, 70cc, and 50cc.
Voltage: The pump can operate with three different voltage levels,
which are DC24, AC110, and AC220.
Suitable for direct drive spindle, motor built-in spindle, etc.,
special for high-speed cutting:
The hydraulic motor or spindle is designed to be used in direct
drive applications, such as motor built-in spindles.
The motor or spindle is specifically designed for high-speed cutting, indicating that it is capable of operating at high speeds while maintaining its performance and reliability.
Order Form
BMV--10--U--16--M--70--MA
1) 2) 3) 4) 5) 6)
BMV:Supercharged knife punch pneumatic cylinder | ||
1) | Diameter | 10:Ø100 12:Ø125 |
2) | Applicable model | U:used to MC |
3) | Oil pressure ratio | 11=11:1 12=12:1 16=16:1 25=25:1 30=30:1 39=39:1 51=51:1 |
4) | M:With hydraulic detection device N:No hydraulic detection device | |
5) | Spit volume | 50cc, 70cc, 110cc, 150cc,etc |
6) | Mounting type | FA:vertical type,LB:horizontal type |
Our production:
FAQ
Q1: We have our own factory and can provide the best price and service.
Q2: We accept customization or non-standard products.
Q3: The MOQ depends on the customer's needs, and trial orders are welcome before mass production.
Q4: The delivery time is 7 days if the company has stock, and 15-30 working days if we don't have stock. However, the delivery time also depends on the quantity and requirements of the products.
Q5: The company's payment terms are T/T.
Q6: The company does not provide samples.