Active Member
|
[China]
Address: 30A, Block B, Modern Window, HuaQiang North, FuTian, ShenZhen, China 518031
Contact name:
Shenzhen Lee&Jack Power Technology Co.,Ltd |
|
|
14.8V 6600mAh Li-ion Defibrillator Battery For Mindray D5 D6 Z6 DP-50 DP-50T DP-50Vet Defibrillator
Product Information
| Brand | Lee&J. Power |
| Reference | LH-MHD600MD |
| Color | Grey |
| Type | Li-ion |
| Capacity | 6600mAh |
| Voltage | 14.8V |
| Weight | 900g |
| Warranty | 12 months |
| Size | 173 x 64.11 x 47.19 mm |
| Replace Code | LI34I001A, 022-000012-00/ LI34I002A, M05-010005-09 |
| Suitable For | Mindray Defibrillator D5 D6, Ultrasound Z5, Z6, DP-50 DP-50T, Veterinary Ultrasound DP-50Vet |
Detail Image
Installing Battery
As shown in the following figure.
1. Open the battery cover and put the battery into the bay (Note
that the battery
shall be put in correct direction).
2. Push the battery into the battery bay ①, and push to the right
side as ② until it’s
tightly locked
3. Close the battery cover.
Battery Status Indicator (Position: The Control Panel on the lower left corner)
1.It illuminates in orange when battery is charging;
2. It illuminates in green when battery is charging to100%
electricity;
3. When the battery capacity is more than 20% in discharging
status, the green indicator blinks.
4. When the battery capacity is less than 20% in discharging
status, the orange indicator blinks;
When less than 10%, the orange indicator blinks quickly.
5. When the battery is in non-charging/discharging status or no
battery is in, the indicator is not on.
Battery Alarming
| Alarming tips | LOG record | Potential Reasons |
| Alarming! Illegal operating battery! Lead to permanent damage | Battery Hot Plug | Perform hot swapping to the battery when power-on |
| Battery communication is abnormal | Battery I2C error | It checks if the battery I2C or the interface of power model 12C has been damaged when AC power is supplied. |
| Battery communication is abnormal, please connect to AC power supply or shut down! Otherwise after 60s the system shuts down automatically! | Battery I2C error,the battery supply | It checks if the battery I2C or the interface of power model 12C
has been damaged when no AC power is on. |
| Battery temperature is too high; please connect to AC power supply or shut down! Otherwise after 60s the system shuts down automatically! | Battery temperature is out of range temp, Battery temperature is: xx centigrade | When power on and battery supply, the temperature of battery exceed 58' |
| Battery temperature is too low; please connect to AC power supply or shut down! Otherwise after 60s the system shuts down automatically! | battery voltage is low, battery volt is xx V | On the status of power-on and battery supply, battery voltage is lower than 12V. |
| Battery is abnormal, and Discharge / Charge is abnormal. | battery break | Battery have been damaged |
| Battery voltage is too low, please connect to AC power supply or shut down! Otherwise after 60s the system shuts down automatically! | Low battery power, battery power is XX | On the status of power-on and battery supply, battery voltage is lower than 0%. |
| Battery life is approaching, please replace with new battery | battery cycle is XX, please change the battery | The usage time of battery is too long |
| / | Battery I2C error, Shutdown State | On the status of power-off and AC power supply, the I2C of battery or power module is broken |
| / | Battery Hot Plug, Shutdown State | Perform hot swapping to the battery when on the status of power-off |
Troubleshooting
| No. | Fault Description | Cause Analysis | Measure |
| 1 | Fail to start up when powered by the battery only, but can start up normally by AC power supply. After the machine is powered on, battery alarm appears. | Internal battery fails; Related board or module of the other power system is in normal status | Replace the battery |
| 2 | No AC input, Fail to start up when powered by the battery; The power on indicator flash then turn off, battery indicator flash, succeeding in start up when AC input and battery can charge up normally | Battery is out of power | Charge up |
Product Description
This battery has been manufactured with high-quality components. It
complies with every particular of the orginal manufacturer's
regulations and is guaranteed against all manufacturing defects.
A margin of 0.1V difference in the voltage is negligible in
batteries. Therefore, such a battery would still be perfectly
compatible. If the capacity (mAh) of the replacement battery is
higher than that of the original battery, this will allow for a
longer usage time.
Contact US
Big wholesale order is acceptable and the price is negotiable,
please contact us for details.
OEM is also welcome. Please tell us the details of the product you
want, then we can design and customize it for you.
Do not hesitate to contact us anytime before and after your
purchase. If you have any questions on your purchase, please let me
know via "contact now" or by email. We will solve it for you.
We are committed to ensuring that you are completely satisfied with
every transaction. 100% Satisfaction guaranteed !
We will reply your mail within 24 hours normally. sometimes have a
little delay due to the weekends or holidays.
(we work from Monday to Friday (8-17:30 GTM+8)
If you can't get our mail after 48 hours, please check your spam or
contact to us. If you email us and I will be on service of you
until you are satisfied with your purchase.
