Home Companies Hunan Heou Engineering Consulting Co., Ltd

OEM ODM Air Terminal Lightning Arrester Earthing 1800mm Height

Hunan Heou Engineering Consulting Co., Ltd
Active Member

Contact Us

[China] country

Address: 618, Goodbond Venture Base, No.18, Lu Yun Road, Yue Lu District, Changsha City, Hunan Province

Contact name:cody

Inquir Now

Hunan Heou Engineering Consulting Co., Ltd

OEM ODM Air Terminal Lightning Arrester Earthing 1800mm Height

Country/Region china
City & Province changsha hunan
Categories Lightning Rod
InquireNow

Product Details

Ese Outdoor Lightning Protection Building Lightning Arrester Lightning Rod
 
 

Early discharge lightning rod has two actions.

Action one: the use of thundercloud electric field, trigger device in the tip of the needle to generate high-voltage pulse, the formation of corona discharge.

Action two: the pulling action through the venturi tube, so that the electric ion more powerfully to the tip of the needle. The upward pilot generated by the pulse will shorten the rendezvous time with the downward pilot.

 

This excitation device integrated in the air terminal is designed to increase the excitation distance and thus generate the
ascending tracer earlier(regarding to an ascending tracer naturally emitted by a simple rod.
All of our early streamer emission systems are tested in compliance with NF C 17-102 standard,edition September 2011.
Protection systems
Standards
Early streamer emission air terminal
- France: NF C 17-102 (September 2011 edition)
- Argentina: IRAM 2426
- Spain: UNE 21186
- Macedonia: MKS N.B4 810
- Portugal: NP 4426
- Romania: I-20
- Slovakia: STN 34 1391
- Serbia: JUS N.B4.810
Single rods air terminals
IEC 62 305-3
Meshed cages
IEC 62 305-3
Stretched wires
IEC 62 305-3

 

 

Specification
 
Installation Guidelines
3 main components are part of a lightning protection system. .The capturing device with its supporting mast and fixings. .The down conductor composed of one or several tin-ned copper tape with section in compliance with stan-dards in force,designed to flow the lightning current of the lightning conductor to the earthing system.This conductor will usually run outside the structure.Each fixing should allow an eventual conductor dilatation.Bend radius have to be inferior to 0.2 meters.Metalli-cal masses situated in the zone of separation calculated beforehand will be interconnected equipotentially to the lightning conductor.Each down conductor will be equipped at the bottom with a control junction and a 2 meter-high mechanical protective tube. .The earthing system with an adapted form in com-pliance with standards in force has for aim to diffuse the lightning current to the ground.An inspection pit will be installed to do the equipotential connection with the nearest electrical earth netword of the building. Installation quality of a lightning system is an impor-tant element ofr the efficiency of a lightning protection system. For each installation and in most of cases it will be bet-ter to start with the installation of the earthing sys-tems,then as direct as possible channels of each down conductor,then finish with the lightning conductor and roof circuit installation.
 

Hot Products

Thunder Arrester Lightning Protection System Lightning Protection Rod It can be used for direct ...
China Suppliers Wholesale CE Certificate Lightning Arrester ESE Lightning Rod Protection Decorative ...
Hot Sale ESE Lightning Rod Early HD-T6.3 Advance Discharge Lightning Rod Lightning Protection System ...
Good Quality Rod Pv Lightning Arrester For Building TECHNICAL SPECIFICATIONS The capture terminal of ...
Ese Outdoor Lightning Protection Building Lightning Arrester Lightning Rod Early discharge lightning ...
High Quality 304 Stainless Steel Outdoor High-Rise Building Lightning Arrester Rod Main features 1, ...