Home Companies Hunan Heou Engineering Consulting Co., Ltd

1.8m Height Early Discharge Lightning Rod , ESE Lightning Conductor Active

Hunan Heou Engineering Consulting Co., Ltd
Active Member

Contact Us

[China] country

Address: 618, Goodbond Venture Base, No.18, Lu Yun Road, Yue Lu District, Changsha City, Hunan Province

Contact name:cody

Inquir Now

Hunan Heou Engineering Consulting Co., Ltd

1.8m Height Early Discharge Lightning Rod , ESE Lightning Conductor Active

Country/Region china
City & Province changsha hunan
Categories Lightning Rod
InquireNow

Product Details

Hot Sale Stainless Steel Lightning Rod French Original ESE6000 Lightning Rod Outdoor Discharge physics

 

Discharge physics shows that conventional Franklin lightning rods require a delay time to produce upward gravitational force, and this delay time can limit the effectiveness of vertical or horizontal lightning rods.

 

Introduction of products
This excitation device integrated in the air terminal is designed to increase the excitation distance and thus generate the
ascending tracer earlier(regarding to an ascending tracer naturally emitted by a simple rod.
All of our early streamer emission systems are tested in compliance with NF C 17-102 standard,edition September 2011.
Protection systems
Standards
Early streamer emission air terminal
- France: NF C 17-102 (September 2011 edition)
- Argentina: IRAM 2426
- Spain: UNE 21186
- Macedonia: MKS N.B4 810
- Portugal: NP 4426
- Romania: I-20
- Slovakia: STN 34 1391
- Serbia: JUS N.B4.810
Single rods air terminals
IEC 62 305-3
Meshed cages
IEC 62 305-3
Stretched wires
IEC 62 305-3

 

 

Specification
item
value
Place of Origin
China
Model Number
HD-6000
Material
Stainless Steel
Type
High-rise Building
Function
Lighting Protection
Application
High Building
CERTIFICATE
ISO9001:2008
Use for
High-rise Building Lightning Protection
Early discharge time
60µs
Installation Guidelines
These 3 main parts are the components of the lightning protection system.
This conductor will usually run outside the structure.Each fixing should allow an eventual conductor dilatation.Bend radius have to be inferior to 0.2 meters.Metalli-cal masses situated in the zone of separation calculated beforehand will be interconnected equipotentially to the lightning conductor.Each down conductor will be equipped at the bottom with a control junction and a 2 meter-high mechanical protective tube.
The capturing device with its supporting mast and fixings. .The down conductor composed of one or several tin-ned copper tape with section in compliance with stan-dards in force,designed to flow the lightning current of the lightning conductor to the earthing system.
The earthing system with an adapted form in com-pliance with standards in force has for aim to diffuse the lightning current to the ground.An inspection pit will be installed to do the equipotential connection with the nearest electrical earth netword of the building. Installation quality of a lightning system is an impor-tant element ofr the efficiency of a lightning protection system. For each installation and in most of cases it will be bet-ter to start with the installation of the earthing sys-tems,then as direct as possible channels of each down conductor,then finish with the lightning conductor and roof circuit installation.

Hot Products

High Quality 304 Stainless Steel Outdoor High-Rise Building Lightning Arrester Rod Main features 1, ...
CB IEC62133 UN38.3 U L Approval 2S1P 2000mah Battery Lipo 18650 Product Photo Product Description ...
Early Streamer Emission Lightning Protection ESE Conductor ESE Arrester Product Description Early ...
ESE Lightning Rod Early HD-T6.3 Advance Discharge Lightning Rod Lightning Protection SystemHD-T6.3/0...
Hot Sale Stainless Steel Lightning Rod French Original ESE6000 Lightning Rod Outdoor Discharge ...
Stainless Steel Lightning Rod French original ESE2500 lightning rod outdoor "HDE" lightning rod in ...