Home Companies Wuxi Fenigal Science & Technology Co., Ltd.

Class CB Automatic Transfer Switch with Overcurrent Release and Rated Current WATSN-800

Contact Us

[China]

Trade Verify

Address: 606#, Building-B, 100 Dicui Road, Binhu District, Wuxi, Jiangsu, China

Contact name:Harry

Wuxi Fenigal Science & Technology Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Class CB Automatic Transfer Switch with Overcurrent Release and Rated Current WATSN-800

Country/Region	china
City & Province	wuxi jiangsu
Categories	Wires, Cables & Cable Assemblies

Product Details

Class CB Automatic Transfer Switch with Overcurrent Release and Rated Current WATSN-800

Class CB
ATSE with overcurrent release
Its main contact can be closed and used to break short-circuit current
WATSN series automatic transfer switch is a class CB automatic transfer switch if it
adopts a circuit breaker with overcurrent release as the actuator. With selective
protective function, it can provide short-circuit and overload protection for
downstream loads and cables. Its making and breaking capacity is significantly
higher than other components such as contactors and relays.

Model and specification Electrical characteristics determined according to IEC 60947-6-1&GB14048.11				WATSN-800	WATSN-1000	WATSN-1250	WATSN-1600
Number of poles				34	3,4	34	34
Controller
Type A				■	■	■	■
Type B					■	■	■
Type D
Actuation component				NS-N,NS-H
Rated current (A)	In			800	1000	1250	1600
Rated insulation voltage V)	Ui			800	800	800	800
Rated impulse withstand voltage (kV)	Uimf			8	8	8	8
Rated operation vottage (V)	Ue	AC50Hz		415	415	415	415
Ultimate breaking capacity	Icu	AC50Hz	220/240V	50/70	50/70	50/70	50/70
(kA effective value)	Icu	AC50Hz	380/415V	50/70	50/70	50/70	50/70
Operation breaking capacity	Ics	(%lcu)		75%	75%	75%	75%
Isolation function				■	■	■	■
Mechanical endurance	(“)			10000	10000	10000	10000
Electrical endurance	(“)	AC50Hz 440V-In		5000	5000	4000	2000
Minimum contact transfer time	(**)	S		2.5	2.5	2.5	2.5
Protection and measurement
Interchangeable control unit	Common release (standard)			Mic2.0	Mic2.0	Mic2.0	Mic2.0
	Common release (standard)			Mic5.0	Mic5.0	Mic5.0	Mic5.0
Installation and connection
Fixation /Panel front connection	(***)				■	■	■
Monitoring and indication auxiliary device
Position feedback signal					■	■	■
Fire protection linkage function					■	■	■
Alarm feedback signal					■	■	■

Wide application

● Used in AC220V and AC380V systems

● Three operation modes configurable on the site: automatic change and automatic

recovery, automatic change without automatic recovery, and mutual standby.

● Can be easily connected to a smart monitoring system

High-performance product

● High breaking capacity (class CB)

● Operation breaking capacity is equal to 100% of ultimate breaking capacity (class

CB)

● Provide high current-limiting capacity and total economic selectivity (class CB)

● Provide high short-circuit making capacity and rated short-time withstand capacity

(class PC)

Easy connection and installation

● No need to derate in both horizontal and vertical installation

● No need to derate for lower incoming lines

Higher reliability

● Alarm for wrong neutral connection

● Automatic signal cutoff in case of unsuccessful transfer

Smart communication

● RS485 communication interface and Modbus-RTU communication protocol

● Provide four remote functions including telecommand, telemetry, telecontrol, and

telereg

Notes:
Controller types include: A - Terminal type; B - Basic Type; D- Smart type
Frame current levels: 63, 100, 160, 250, 400, 630, 800, 1000, 1250, 1600
Rated current: Depending on different frame levels, the release is selected by the user (by making reference to NSX/NS circuit breaker sample)
Selectable number of poles: 2 (only for iC65 series), 3, 4 (all series)
Electric device Class: CB - with short-circuit and overload protection
Operation modes: R - Automatic change and automatic recovery; S - Automatic change without automatic recovery; I - Mutual standby
Additional functions: X- Fire protection linkage; F- Feedback signal; I - Current monitoring module (only available for Type D controller)
Release – class CB. Release with different protection range can be selected based on user needs.
*: Two installation methods can be provided: Device-mounted and panel-mounted.
Please add a note if panel installation is required. iC65 products do not support
panel-mounted controllers.
**: F- Feedback signal function (including position feedback and alarm feedback, please add explanatory text if necessary).800-1600A series products include a group of position feedback and a group of alarm feedback as standard. For 63A and lower current products, only a group of position feedback is available.

Hot Products

Din Rail Dual-Power Auto Transfer Switch Manual Auto Operation Grid/Generato

Contact Us

Wuxi Fenigal Science & Technology Co., Ltd.

Class CB Automatic Transfer Switch with Overcurrent Release and Rated Current WATSN-800

Product Details

Hot Products

Din Rail Dual-Power Auto Transfer Switch Manual Auto Operation Grid/Generato

Class CB Transfer Switch for Automatic Change and Recovery with Overcurrent Release

Class CB Automatic Transfer Switch with Overcurrent Release for AC220V and AC380V Systems

Class CB Automatic Transfer Switch with Overcurrent Release and Rated Current WATSN-800

Specialized Customized RGBT Filming Industry Led Inflatable Balloon 1000W