Electric handheld Rockwell Hardness Tester Rockwell Durometer
Integrally Cast Body
Classic Accurate And Reliable Integrally Cast Body Electric
Rockwell Hardness Tester Rockwell Durometer
Function and features
● Dial display & Electric load
● Rockwell Scales: HRA, HRB, HRC
● Automatic testing process without manual operating error;
● Wide range of applications, easy to operate
● Meets or exceeds GB/T230.2, ISO 6508-2, ASTM E18 standards
● Accurate, reliable, durable
Application
● Industrial production, Inspection of product quality on
processing technology.
● Ferrous and nonferrous metals, Hardened steel, tempered
steel, annealed steel, hardened steel, sheet of various
thicknesses, carbide materials, powder metallurgy materials,
hardness and thermal spray coating.
Technical Parameters
Technical Parameters |
Model | LHR-150DT |
Indication of Hardness Value | Dial |
Max Height of Specimen | 170mm |
Indication of Hardness Value | Dial display |
Carried Standard | GB/T230.2, ISO 6508-2, ASTM E18 |
Distance of Indenter to outer wall | 165mm |
Preliminary Testing force | 10kgf(98.07N) |
Testing force | 60kgf(588N) 100kgf(980N) 150kgf(1471N) |
Rockwell Scale | HRA,HRB,HRC |
Hardness measuring range | HRA:20-88 HRB:20-100 HRC:20-70 |
Power supply | AC220V+5%,50-60Hz |
Overall Dimension (mm) | 520*240*700 |
Net Weight | About 80Kg |
Standard Accessories
Standard Accessories |
Name | Quantity | Name | Quantity |
Diamond Rockwell Indenter | 1 | 1/16 Ball Indenter | 1 |
Hardness block(HRC , HRB ) | 3 | Large, Medium, “V” shaped Testing Table | 3 |
1/16 Ball | 6 | Plastic Dustproof cover | 1 |
Operation Manual | 1 | Product Certificate | 1 |
Power cable | 1 | | |
Installation
1 Unpacking
1.1 Please open the package,take down the four screw at the bottom
of the body.The hardness tester will be installed in the clean and
dry room without the corrosive gas and the vibration.The table
should be strong and there must be one hole whose diameter is more
than 50mm.The screw can pass the hole .
1.2 Please check all the accessories according to the packing list.
1.3 Please open the upper cover and the back cover of the machine .
1.4 Loosen the nut and remove the hook screw.
1.5 Remove the fixed block and the fixed supporting
block of the big lever.
1.6 Loosen the nut and take off the hook screw then
remove the fixed platen on the weights .
1.7 The user may lift the weight groups slowly with the hands
pinching the boom and at the same time remove the fixed supporting
block then put down the weight groups gently. The pin is in
the groove of the plate.
1.8 Loosen the fastening cord on the small lever.
1.9 When turning the handwheel ,the screw is down and
take off the indenter block.
2 Please remove the screw sleeve. Clean the rust oil on the screw
and the handwheel with the kerosene. And then pour a small amount
of the lubricating oil into the screw and the handwheel.
3 Please check he block on the big lever that is in the
position of the two red mark, otherwise it should be adjusted.
4 The big workbench is installed on the top of the screw and
put the level on the table. The level adjustments is within
0.2/1000.