|
[China]
Trade Verify
Address: Building C/D,longrun industrial area ,NO.1001-3 Xihuan Road Shangxing West Industrial Park, Shajing street,Bao'an District,Shenzhen,China
Contact name:Joyce
Shenzhen Longrun LED Optelectronic CO.,LTD |
|
Verified Suppliers
|
|
|
P5.92 P8 Common Cathode Outdoor Fixed Front Service Commercial Die-Casting Aluminum Led Display
Product Features
Product Technical Parameter
| Model No. | FH5.92 | FH8 |
| Pixel Pitch | 5.92 | 8 |
| LED Lamp | SMD2727 | SMD3535 |
| Density | 28476 | 15625 |
| Module Size | 320x320 | 320x320 |
| Module Resolution | 54x54 | 40x40 |
| Module Material | Die-casting+plastic | Die-casting+plastic |
| Cabinet Size | 640x960 | 640x960 |
| Cabinet Material | Die-casting aluminum | Die-casting aluminum |
| Scanning Mode | 1/7 | 1/5 |
| Flatness | ≤0.3 | |
| Grey Scale | 14 | |
| Protection Level | IP65 | |
| Installation/Service Method | Front and Back Installation/Front and Back Service | |
| Brightness | 6000-6500 | |
| Horizontal/Vertical View Angle | ≥140°/≥120° | |
| Contrast Ratio | ≥5000:1 | |
| Module Max Current DC | 6A+10A | |
| Module Input Voltage DC | 3.2V+4.2V | |
| Standard Receiving Card | A3S | |
| Refresh Frame Frequency | 50/60 Hz | |
| Network Connection Port | Customized HUB | |
Module Pictures
Cabinet Pictures
Exhibitions
Logistic and payment
FAQ
| Q: What is the brightness, viewing angle, and wavelength of the LED? |
A: Luminous Intensity is equal to the amount of luminous flux
emitted into a very small solid angle at a defined angular
orientation from the light source. The measurement for luminous
intensity is the candela. The symbol is Iv.
|
| Q: What is the dominant wavelength? Please specify the ranges of wavelength in red, green, and blue colors respectively. |
A: Dominant wavelength is defined as the best range of wavelength showing the most natural color recognized by human eyes. Researches indicate that fixed colors with a wavelength of 620-630nm (red), 520-530nm (green), and 460-470nm (blue), in fact, mixed in a particular proportion, can get the pure white. That is, in the display field, people use luminous materials with the above wavelength to make "compounded" white more natural. In order to get a good balance white led display, we specify the led colors with wavelength within 4nm for each color
|
| Q: Which chip vendors are you buying from? |
A: It depends on the Customer's requirement. We can purchase from Japan, Korea, Europe, USA. We are using chips mainly from Taiwan
|
| Q: What is the chip size you're using for outdoor display? How about an indoor display? |
A: For outdoor display, we're using a 12mil chip for red, 14mil for both green and blue. Regarding indoor display, 9mil for red, 12mil for green and blue are currently adopted
|
| Q: How much will the brightness of LED drop down after 1000hrs? |
A: Based on the result of the aging test, the brightness decay of green LED is around 5%-8%, while blue is around 10%-14% and red is around 5%-8%
|
