Home Companies LCD-CESP LIGHTING,CO., LIMITED

Ultra Slim 50 Watt 24V 60000 lumen LED Security Flood Light

Active Member

Contact Us

[China]

Address: UNIT 047/F BRIGHT WAY TWR 33 HONG KOK RD KLN Hong Kong

Contact name:Lisa Qin

LCD-CESP LIGHTING,CO., LIMITED

Ultra Slim 50 Watt 24V 60000 lumen LED Security Flood Light

Country/Region	china
City & Province	hong kong hong kong

Product Details

Ultra Slim 50 Watt 24V 60000 lumen LED Security Flood Light

50w led flood light 24VDC 8 differents beam angle 170lm/w 4000K waterproof IP66

High output lighting made for you
With LCD-CESP STE-FL LED site & area and floodlight luminaires, high output lighting doesn’t have to mean high energy and maintenance costs. STE-FL provides your outdoor area with bright, uniform illumination while slashing energy and maintenance costs compared to traditional lighting technologies.

Energy savings	Modular housing	Control functions
LCD-FK brings the intrinsic energy savings of LED technology, which lowers utility bills and reduces payback periods. These long-lasting luminaires also require less frequent maintenance, decreasing costs even further compared to traditional HID technologies.	LCD-FK modular housing provides a full range of scalable solutions in one family, allowing you to use only what you need. Additionally, with industry leading high output illumination of over 95,000 lumens, you can potentially use fewer luminaires compared to HID.	LCD-FK programmable dimming, motion response, preplanned maintenance and other control functions further optimize energy savings and extend the luminaire’s life while maintaining a sense of security throughout your site.

Now you can instill a sense of security and attract attention in any large area or floodlighting application without the hassle of frequent relamping or high utility bills.

Specification

Product Number	LCD-FK-055	LCD-FK-085	LCD-FK-105
Rated Power	50W	80W	50W
Lumen (lm)	6000	9600	12000
Rated Voltage	90-305VAC
Power Factor	>95
Color Temperature	3000 / 4000 / 5000 / 6000K
CRI (Ra)	>75
IP Rating	IP65
LED Chip	LUMILEDs SMD3030
Driver	Meanwell/philips
Lifespan	>50,000hr
Housing Material	Aluminum
Operating Temperature	-30°C~ 50°C
Beam Angle	60°/ 90°/ 120°
Warranty	5 years
Certification	CE -RoHs-SAA

CAUTION

RISK OF PRODUCT DAMAGE

Never connect luminaires and/or components under load with supply voltage turned on.
Do not mount or support these luminaires in a manner that can cut the outer jacket or damage wire insulation.
Do not restrict fixture ventilation. Allow for some volume of airspace around luminaire. Avoid covering luminaire with insulation, foam or other material that will prevent convection or conduction cooling.
Do not exceed luminaire maximum ambient temperature.
Do not modify the luminaire.
Only use luminaire in its intended application and location.
Led products are polarity sensitive. Ensure proper polarity before installation.
Electrostatic Discharge (ESD) can damage LED. Personal grounding equipment must be worn during all installation and servicing of the luminaire.
Do not touch individual electrical components as this can cause ESD, shorten LED life, or impact LED performance.
Always read the luminaires complete installation instructions prior to installation for any additional luminaire specifific warnings.
In the case of HID or Fluorescent luminaires, regular re‐lamping is required to keep luminaire operating within safe limits
Do not install damaged product. Handling and installing damaged products can potentially increase the risks mentioned In case of damage and/or missing parts upon arrival of the luminaire, please contact us.
These instructions do not purport to cover all details or variations in equipment nor to provide every possible contingency to meet in connection with instal‐lation, operation or maintenance.
Please see luminaire specifific Installation and Maintenance Instruction for additional warnings or any applicable LCD or regulatory statements. Failure to follow any of these Instructions could void luminaires warranties.

Luminaire Maintenance

Regular luminaire maintenance programs are recommended.
It is recommended to clean the outside of the luminaire and the refractor/lens.
Frequency of cleaning will depend on ambient dirt level and minimum light output which is acceptable to user.
If clean water is not sufficient for cleaning, use a neutral, synthetic, not‐scratching and not‐abrasive cleaning substance.
Never use alkaline and/or acetous cleaning substances.
Make sure that the cleaning substance is carefully removed by rinsing with lots of clean water.
LCD recommends using a cleaning solution that has a PH between 5 and 8.

Product Photos: