IP67 24050lm Zone 1 Explosion Proof Atex LED Flood Light
Explosion proof emergency light 185W Zone 1 & Zone 21 220V
50/60Hz IP67 24050lm
WHAT IS ATEX?
ATEX is “ATmosphere EXplosible”
ATEX is the name commonly given to the two European Directives for
controlling explosive atmospheres: 1) Directive 99/92/EC (also
known as ‘ATEX 137’ or the ‘ATEX Workplace Directive’) on minimum
requirements for improving the health and safety protection of
workers potentially at risk from explosive atmospheres working in
hazardous area industries. The ATEX Zones for lighting products are
designated either Zone 1 or Zone 2 depending on the exposure threat
to flammable gases or vapours – accordingly these hazardous area
lighting systems must be correctly specified according to the level
of explosion. Classifying hazardous areas into Zones:
HAZARDOUS AREAS
ZONE 1 V ZONE 2
Zone 1: is a hazardous area classified by ATEX in which an
explosive atmosphere consisting of a mixture with air of flammable
substances in the form of gas, vapour or mist is likely to occur in
normal operation occasionally.
Zone 2: is a hazardous area classified by ATEX in which an
explosive atmosphere consisting of a mixture with air of flammable
substances in the form of gas, vapour or mist is not likely to
occur in normal operation but, if it does occur, persists for a
short period only.
Overview of ATEX Lighting products:
LCD Ex lighting ranges are ATEX and IEC Ex certified suitable for
both Zone 1 and Zone 2 hazardous areas:
Hazardous Area LED Highbay Luminaires – Zone 1 Zone 2 ATEX LED
Lighting
Hazardous Area Linear Luminaires – Zone 1 Zone 2 ATEX Flameproof
Lighting
Hazardous Area Floodlights – Zone 1 Zone 2 (21/22) ATEX Floodlights
Hazardous Area Portable – Zone 1 Zone 2 (21/22) ATEX Flameproof
Wellglass
Hazardous Area tube – Zone 2 (22) ATEX Tube Luminaires (
Increased Safety)
Technical information
Parameters: | | |
Electric | Rated Power | 50W 60W 80W 100W 120W 150W 185W 200W |
Input Voltage | AC100-277V, 50/60HZ |
Input Frequency | 50/60Hz |
Power Factor | > 0.95 |
Driver Efficiency | ≥ 91% |
(Lumens per Watt) | 130Lm/W |
Beam Angle | 25°/40°/60°/120° |
Correlated Color Temperature (CCT) | 5000K |
CRI | Ra>70 |
Environmental | Ambient Operating Temperature | -40°C~+60°C |
Ambient Operating Humidity | 10%~90% RH |
Altitude of installation site: | <2000m |
Atmospheric pressure | 86~106KPa |
Mechanical | Lens Material: | PC |
Mounting Options | Ceiling, Wall type, Pipe |
Corrosion-proof Grade | WF2 |
Gand's Spec | NPT3/4" |
Warranty | 5-year limited system warranty |
Lumen Maintenance: 50,000 hours@ L80 |