Active Member
|
[China]
Address: KHJ industrial park,Building1,Chuangxin industrial park,Xintian community,Guanlan,Longhua new district,Shenzhen,China.
Contact name:
Shenzhen KHJ Semiconductor Lighting Co., Ltd |
|
|
LED Explosion Proof Flood Light,UL listed,120W,150W, vibration and
shock resistant
Highlight:LED Explosion Proof Flood Light, vibration and shock resistant
Features And Benefits:
1. Copper free aluminum alloy enclosure with epoxy powder coating, high corrosion resistance.
2. High efficacy Led source, whole luminaire efficacy up to 140lm/w.
3. Low THD around 10%,Less interference.
4. Environmentally friendly, no mercury.
5. 5 years full performance warranty.
Product Important Information:
| Type Of Protection | Class Ⅰ Division 2 | |||
| Protection Standards | UL 844 - Luminaires for Use in Hazardous | |||
| Area Classfiction | Division Ⅱ | |||
| Installation | NFPA70 | |||
| Certificate | 20170914-E491372 | |||
| Equipment Coding | Class Ⅰ Division 2, Groups A,B,C,D | |||
| Temperature Class | Rated power (W) | -40℃ ≤ Ta ≤ +50℃ | -40℃ ≤ Ta ≤ +45℃ | -40℃ ≤ Ta ≤ +40℃ |
| 120W-150W | T4 | T4A | / | |
| UL Coding | Class Ⅰ | |||
| Ingress Protection | IP66 (IEC)EN 60529 | |||
| Cable entry | M20*1.5 or M25*1.5 and 3/4 NPT | |||
| UL Mark | The UL marking of this product applies to NEC 500. | |||
Applications:
Can be widely used for hazardous area class 1 division 2, where
flammable vapors, gases,ignitable dusts, fibers or flyings are
present; indoors or outdoors
1. Class I, Division 2, Groups A, B, C, D
2. Locations requiring continuous and consistent light levels in
extreme ambient temperatures
3. Areas requiring frequent on-and-off of lights
4. Where extremely corrosive, wet, dusty,hot and/or cold conditions
exist
5. Other potentially explosive industrial environments
Ordering information:
| P/N | Operating Voltage(V) | Luminous Flux(lm) | Power(W) | CRI | Color Temp. | CCT(K) | Class I, Division 2 Groups A,B,C,D | ||
| -40°C to 40°C | -40°C to 45°C | -40°C to 50°C | |||||||
| Ex-KPLB120*WM-UL-E | 100-277 AC(141-392 DC) | 16380 | 120 | 70 | Warm white | 3000±300 | T4A | T4A | T4 |
| Ex-KPLB120*NH-UL-E | 17640 | 120 | 70 | Natural white | 4000±300 | T4A | T4A | T4 | |
| Ex-KPLB120*NH-UL-E | 17640 | 120 | 70 | Natural white | 5000±300 | T4A | T4A | T4 | |
| Ex-KPLB120*CH-UL-E | 17640 | 120 | 70 | Cool white | 5700±300 | T4A | T4A | T4 | |
| Ex-KPLB150*WM-UL-E | 21840 | 150 | 70 | Warm white | 3000±300 | T4A | T4A | T4 | |
| Ex-KPLB150*NH-UL-E | 23520 | 150 | 70 | Natural white | 4000±300 | T4A | T4A | T4 | |
| Ex-KPLB150*NH-UL-E | 23520 | 150 | 70 | Natural white | 5000±300 | T4A | T4A | T4 | |
| Ex-KPLB150*CH-UL-E | 23520 | 150 | 70 | Cool white | 5700±300 | T4A | T4A | T4 | |
Remarks:
1. * Stands for beam angle,including H1V1 / H4V4 / H5V5 / H6V6 /FW;
2. For Beam angle H1V1,H4V4 and H5V5,the luminous flux will be 15% less;
3. For Beam angle FW the luminous flux will be 30% less.
