|
[China]
Trade Verify
Address: 501,Buildings 16 NO.7,Xikeng South Road ,Xikeng Community,Fucheng Street,Longhua District,Shenzhen
Contact name:Bob
Luxsun lighting Co.,Ltd |
|
Verified Suppliers
|
|
|
OPSKY, another masterpiece under the family design language, is a cost-effective outdoor lighting from 50W to 280W. OPSKY still uses the iconic family design language, and boldly adopts the back line shape.The smooth concave and slightly upward lines on both sides of the waistline make OPSKY more sporty.
The industry’s first hollow design power supply will generate a lot
of heat during work, and the heat will continue to be transferred
upwards. The hollow design is to isolate the heat source and make
the junction temperature of the LED light source lower.
It is widely used in factories, billboards, highways, railways,
tunnels, bridges, culverts, squares, stadiums, buildings and other
scenes.
• Power: 50W-100W. The higher the wattage, the brighter the light. 50-70W is good for most residential uses. 80-100W would be better for larger commercial spaces or for lighting up taller buildings.
• Lumens: 6000 to 15,000 lumens. The higher the lumens, the brighter the light. For reference, a typical incandescent bulb is around 800-1500 lumens. So an LED floodlight will provide much more light.
• Color Temperature: 3000K (warm white), 4000K (neutral bright white), 5000K (daylight) are common options. The higher the temperature, the cooler (bluer) the light appears.
• Beam Angle: Floodlights typically come with 30 to 120 degree beam angles. Wider beam angles, like 90-120 degrees will illuminate a larger area. Narrower beam angles, like 30-60 degrees are better for illuminating specific areas from a distance.
• Housing: An aluminum alloy housing is common. It helps dissipate heat and is weather/water resistant for outdoor use. Some are IP65 rated to withstand rain and dust.
• Mounting: Most come with an adjustable mounting bracket for aiming and can be wall mounted or mounted on the ground. Some come with stakes that can be inserted in the ground.
• Long lifespan: 50,000 to 100,000 hours. That's 11-22 years if used for 8 hours per day. So very energy efficient and low maintenance.
• Energy Efficient: Only uses 50-100W of power but can provide the light output of a 400-1000W halogen floodlight. So very energy efficient.
| Part No. | LUX-FLS-50 | LUX-FLS-75 | LUX-FLS-100 | LUX-FLS-150 | LUX-FLS-180 | LUX-FLS-240 | LUX-FLS-280 |
| Power | 50W | 75W | 100W | 150W | 180W | 240W | 280W |
| Voltage | AC100-277V | ||||||
| Angle | 25°/30°/60°/90°/120°/80°x150°/P45°/40x130°/60x130° | ||||||
| Luminous Efficacy | 130lm/W/ 140lm/W/170lm/W available (SMD 3030/2835/5050) | ||||||
| CCT | 5000K (3000K, 4000K, 5700K, 6500K available) | ||||||
| CRI | >70 (>80, >90 available) | ||||||
| Dim | 0-10v/Dali optional | ||||||
| IP | 67 | ||||||
| Operating temperature | -30℃ to +45℃ | ||||||
| Smart control options | Photocell/Motion sensor/LoraWAN | ||||||
| Warranty | 5 years | ||||||
| Life span | ＞50,000 hrs | ||||||
1. We use Dialux software to simulate the luminous effect, so as to make sure our proposals meet clients' requirements.
2. Our PMC department follows the production and we can report to you at any time about the production by photos and videos.
3. We have IQC, IPQC, and OQC during the production, guarantee the products.
4. We have a large capacity and quickly finish the cargos in a short time with our experienced production team.
