Active Member
|
[China]
Address: Zone D, 3 / F, Building A, Zhentai Industrial City, No. 4 Jiangbian Industrial First Road, Songgang Street, Baoan District
Contact name:Yolanda
Shenzhen Yizhuo Electronics Co., Ltd |
|
|
SMD LED HASL OSP Prototype Circuit Board Custom Round Square Type
Custom Round Square Smd Aluminum Plate Led Pcb Board For Led Light Lamp
What is an SMD LED PCB Board?
SMD stands for Surface Mount Device. The surface mount technology (SMT) has almost replaced the through-hole technology. However, through-hole technology is still used for the components that cannot be surface mounted. Therefore, Surface Mount LED PCB is very popular
SMDs are compact components that can be directly placed over the PCB. There is no need for a hole because the components do not have leads or might have small leads. There are only small contacts at the ends of the device that are used to make connections. Consequently, the PCBA is very compact. SMDs are soldered using reflow soldering. At first, the solder paste is applied on the bare board. Then, the components are picked and placed in the desired place. Finally, the board is passed through a reflow oven, and the components are directly mounted without any hassle.
An SMD LED PCB board contains SMD LEDs that are more compact than their through-hole equivalents. SMD LEDs are widely used nowadays. They provide higher lumen output, which improves the level of illuminance in the area. They are more efficient and brighter. This is the reason SMD LED PCB boards are preferred.
No. | Item | Specification |
1 | PCB Layers | 1 to 24 layers |
2 | PCB Max working panel area | 457 x 610 mm |
3 | Min trace width | 0.10mm |
4 | Min spacing | 0.10mm |
5 | Min hole diameter | 0.20mm |
6 | Min Copper thickness in hole | 0.020mm |
7 | PTH size tolerance | ±0.05mm |
8 | NPTH size tolerance | ±0.025mm |
9 | Hole position tolerance | ±0.05mm |
10 | Dimension tolerance | ±0.1mm |
11 | Min solder mask dam | 0.08mm |
12 | Insulation resistance | 1E+12Ω (normal condition) |
13 | Max Board twist and wrap | ≤0.7% |
14 | High Vlotage endurance | 1.3KV/mm |
15 | Copper foil peel off endurance | 1.4N/mm |
16 | Hardness of resist ink | ≥6H |
17 | Flame resistance | 94V-0 |
18 | Impedance control | ±5% |
FAQ:
Q1. Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products.
Q2: Are all your products certified with UL, ROHS etc?
A: Yes, we are certified to ISO9001:2015, ISO14001:2015, IFA, UL , SGS, ROHS.
Q3: How can I get a sample to check your quality?
A: After price confirmation,you can place orders for samples for your testing and evaluation.
