Home Companies Huizhou Jiefu Technology Co., Ltd.

Outdoor P4 Flexible LED Module Advertising Full Color LED Display

Contact Us

[China]

Trade Verify

Address: 10th Floor, Building 3, U Valley Zhizao Valley, Liandong, Shuikou Street, Huicheng District, Huizhou City, Guangdong Province, China 516055

Contact name:Amy Yang

Huizhou Jiefu Technology Co., Ltd.

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Outdoor P4 Flexible LED Module Advertising Full Color LED Display

Country/Region	china
City & Province	huizhou guangdong
Categories	Electronics Agents

Product Details

Outdoor P4 Flexible LED Module / Outdoor LED Display

1. Product Presentation:

With the development of The Times, LED indoor soft modules have been unable to meet the current situation of people's high standards for the perfect combination of modeling and practical effects. However, the emergence of the outdoor soft module gets rid of the pain point that the traditional soft module is only installed in the indoor environment without a waterproof function. The waterproof process before and after the outdoor soft module can meet the indoor/outdoor environment conditions at the same time and has soft and bendable performance, and the waterproof advantage and high brightness display effect that the traditional indoor soft module cannot match. The module can be assembled: inner arc display surface, outer arc display surface, and corner screen display surface. It can meet different outdoor shapes and is widely used in a wide range of application fields, such as outdoor central squares, exhibition venues, high-end shopping malls, airport stations, and other public places for media release and display. Make the outdoor display more than flat;

2. Main process characteristics

Module size design 256*128mm, low current, low heat, high contrast, high refresh;

The bottom shell is equipped with 18 magnets, a single magnetic content of 2500 GS, so that the bonding force between the module and the box is stronger, the magnet is anti-salt spray, and anti-corrosion test for 48 hours, and magnet height can be adjusted, effectively improve the flatness and use effect of the screen body;

Support front installation/maintenance design, and front and rear waterproofing process to meet the requirements of IP65 waterproofing class;

The module lamp surface is equipped with a protective mask to protect the lamp bead, is anti-reflective, and prevents solid dust from entering;

The rear cover of the bottom shell adopts a honeycomb design pattern with great visual beauty. The rear cover of the bottom shell can be disassembled for easy maintenance. It can better protect the components on the back of the module from damage and prevent the module from entering water.

The anti-fall safety rope is combined with the enhanced magnetic field to add a layer of safety guarantee to prevent the module from falling due to high ambient wind or high altitude installation operation;

PCB board adopts flexible soft board, bottom shell adopts silicone material, good flexibility performance, eliminate static electricity;

3. Outdoor soft module appearance display

Main module view

Rear view of the module

Interface: a special waterproof design, improves the safety of the interface

Anti-fall safety rope combined with reinforced magnetic, high protection level

4. Installation Instruction

5. Precautions for installation details

When assembling modules, the operator must wear ESD gloves.

Do not splash water on the screen or module. For example, do not use chemical components or hard objects to clean up dust. Use an anti-static soft brush and clean water.

It is forbidden to tear and pull violently, and gently pull and insert the wire to avoid excessive force to pull out the copper column and damage the PCB.

After disassembling the back cover for maintenance, pay attention to the cover must be pressed tightly when returning to the back cover to prevent water in use.

It is recommended that you install the sheet metal box by spraying it. If galvanized square pipes are used, the flatness of galvanized square pipes cannot be guaranteed.

The bending Angle of the module ranges from 162° to 180°. Violent and repeated bending of the module is prohibited.

* Product failure or damage caused by failure to comply with the relevant precautions in the installation detail manual or human factors are not covered by the manufacturer's warranty. Please take good care of the documents and attachments attached to the screen. If you have any questions, please contact us.