P1.86 P2 P2.5 P3 P4 Indoor GOB LED Display Modules 320X160mm Full
color Soft module
1. LED flexible screen introduction
The flexible LED display module, an ingenious invention comes from
the concept of a soft light strip design flexible LED module; A
Flexible LED display module can splice curved screens, cylinders,
curved screens,s and other displays according to installation
requirements, which is a technical improvement with outstanding
characteristics and display progress. Compared with the traditional
flat hard module, injects flexibility, and large-angle concept
design, breaks the traditional technical system, shows soft and
colorful curves to conquer various artistic models with "soft",
giving the audience to create wonderful vision, and vividly present
more colorful visual effects!
2. Main process characteristics
module standardized size design 320X160mm, low current, low heat,
high contrast, high refresh;
XR soft module series is suitable for cylindrical screens, spiral
screens, wave screens, ribbon screens and other art modeling,
application scenes, planning museums, science and technology
museums, urban planning museum, art museum, museum, creative
center, etc.
The box structure adopts high-strength sheet metal sandblasted
iron box, unique segmented splicing process, effectively reduce the
splicing gap of the screen body;
module adopts strong magnetic adsorption installation, magnet
height can be adjusted to improve the flatness of the whole screen,
pre-power maintenance design, special scenarios, can be realized
before installation, with special tools to meet the
pre-maintenance;
PCB board is made of flexible soft board, the bottom shell is
made of silicone material, good flexibility, prevent static
electricity:
module thickness is only 8.6mm, ultra-thin design, small space;
PCB board adopts copper column welding and backgluing method to
form a lockable iron seat with the bottom shell, which makes the
module more firm and reliable;
The single board is equipped with 18 magnets, with a magnetic
content of 2000 GS, which solves the problems of degumming and
warping Angle of common soft modules, and effectively improves the
flatness and use effect of the screen body.
3. Product parameter
| Name of the product | XR-C1.86 |
| Pixel configuration | 1R1G1B(Full color) |
| Lamp bead package specifications | SMD 1515 |
| Pixel density (points /㎡) | 288906 |
| Module Size (mm) | 320X160X8.6 (L*H*T) |
| Module resolution | 172X86 |
| Scanning mode | 43S |
| Constant current IC is standard | PWM |
| Refresh frequency (Hz) | 3840hz |
| Frame change frequency (Hz) | 60hz |
| Gray Level (bit) | 12-13bit |
| Assembled diameter | 611mm |
| camber | ≥150° |
| Signal interface mode | HUB75(Stepless connector) |
| Module bottom shell material | Silicone soft shell |
| Module weight (g/ sheet) | 340g |
| Flatness (mm) | ≤ 0.5 mm |
| Module protection level | unguard |
| Installation/maintenance methods | Front or rear installation/maintenance |
| Brightness (cd) | 700-750cd |
| Color temperature (K) | 10000-12000 Adjustable |
| coordinate | X:0.2500 Y:0.3000 ± 0.01 |
| Horizontal/vertical view | X:150° / Y:120° |
| Contrast | ≥5000:1 |
| Module supply voltage DC (V) | 5V |
| Module maximum current DC (A) | 4.4A |
| Maximum power consumption (w/ sheet) | 22 w |
| Working input voltage AC (V) | 220 V |
| Peak power consumption (w/m2) | 430 w |
| Average power consumption (w/m2) | 123 w |
| Typical life value (h) | 100 000 h |
| Operating temperature range (℃) | -20—40℃ |
| Operating humidity Range (RH) | 20%—75%RH |
4. Installation diagram
5. Precautions for installation details
Wear ESD gloves during module assembly.
Do not splash water on the screen or module. For example, do not
use dishcloths to clean up dust. Use an antistatic soft brush to
clean up hard objects with moisture.
The relative humidity of working environment should be in the
range of 20%~75%, and the module should be placed in a dry place
before assembly. Ensure that the module is stored in an environment
where the temperature is not higher than 30℃ and the humidity is
not higher than 65%.
Do not directly tear and pull by force. Gently pull and insert
the cable to avoid excessive force to break the copper column and
damage the PCB.
Do not install galvanized square pipes because galvanized square
pipes cannot ensure flatness. You are advised to install iron
containers by spraying them.
It is recommended to use the spraying process for simple curved
and cylindrical sheet metal iron boxes, which is easy to install
and has good flatness.
The bending Angle of the module is between 150° and 180°. Violent
and repeated bending of the module is prohibited.
* Product failure or damage caused by failure to comply with the
relevant precautions in the installation detail manual or human
factors are not covered by the manufacturer's warranty. Please take
good care of the documents and attachments attached to the screen.
If you have any questions, please contact us.
6. Packing method
| Module size (mm) | Carton size(mm) | Number of modules | FCL weight (KG) |
| 320X160 | 570X370X385 | 54 | 20.85 |
7. Application scenario
