|
[China]
Trade Verify
Address: UNIT 408B, LIPPO SUN PLAZA, 28 CANTON ROAD, TSIM SHA TSUI, KOWLOON, HONG KONG.
Contact name:Ivan Zhu
UNIQUE AUTOMATION LIMITED |
|
Verified Suppliers
|
|
|
Lead Free RF 350A Wave Soldering Machine SMT Dip Production Line
Dip Production Line SMT Lead Free Wave Soldering Machine RF-350A
Basic Date of wave Solder Machine RF-350A
| Wave solder | RF-350A |
| Preheating System | |
| Preheating Model | IR tube Option : Hot Air Convection |
| No. of Preheating Zones | 3 |
| Preheating Length | 1800 MM |
| Preheating Temp. | Room Temperature : ~300C |
| Warm Time | Approx. 20/min |
| Conveyor System | |
| PCB Width ( L x W ) | 350 MM |
| Conveyor Direction | Optional |
| Conveyor Height | 750 MM |
| Componet Clearance (mm ) | 130 MM |
| Conveyor Width Adjustment | Manual |
| Conveyor Angle | 4 ~ 6 C |
| Spraying System | |
| Transmission Method | Air cylinder |
| Spraying Pressure | 0.25MPa ~ 0.4MPa |
| Flux Flow | Flux Flow meter |
| Auto Flux Feeding | Optional |
| Exhaust Method | Upper Exhaust |
| Exhaust Capacity | 25M3/min |
Product features of Wave Solder Machine RF-350A
1. The front door has a lift-up design, and the rear door is
push-pull; it adopts a plastic spraying process to keep the paint
off, beautiful and durable.
2. Four sections of full hot air independent 2000mm lengthened
preheating zone, full hot air independent PID temperature control,
uniform heating, safe andstable; Make the PCB get a good soldering
effect.
3. Patented titanium alloy chain claw (thickened "double hook" or
"heavy claw" type), non-sticky, non-deformable, and long life.
4. Three observation windows, beautiful and generous in appearance,
convenient for operation and maintenance.
5. The tin furnace rises and falls and enters and exits, the
combination of automatic adjustment and manual adjustment
The role of spoiler wave
The role of spoiler wave: SMT component soldering and prevention of
missing soldering, it ensures proper distribution of solder through
the circuit board. The solder penetrates through the slit at a
relatively high speed, thereby penetrating into a narrow gap. The
spray direction is the same as the direction of the circuit board.
For SMT components, the spoiler wave can basically complete the
welding. But for through-hole components, the spoiler wave itself
cannot properly solder the components. It leaves unevenness and
excess solder on the solder joints, so a second wave---advection
wave is needed.
The Picture of Wave Soldering Machine
