Home Companies Changsha GOMECY Electronics Limited

Multi Pulse Working Mode IPL SH Machine With Input Power 50/60HZ Laser Hair Removal

Contact Us

[China]

Trade Verify

Address: Block A, 1/F Jinri Science Park, No. 26 Jinyuan Road, Daxing District,Beijing, China

Contact name:Mary Wong

Changsha GOMECY Electronics Limited

Verified Suppliers

Trust
Seal
Verified
Supplier
Credit
Check
Capability
Assessment

Multi Pulse Working Mode IPL SH Machine With Input Power 50/60HZ Laser Hair Removal

Country/Region	china
City & Province	beijing beijing
Categories	Spa Supplies

Product Details

Product Description:

2024 GOMECY Faery Multi-Pulse Working Mode IPL SH Machine with Input Power 50/60HZ most effective laser hair removal

1. Hair growth cycle:

Growth period, transition period, rest period. The growth cycle is about 28-42 days.

2. Principle of hair removal:

The hair shaft absorbs energy and transmits energy to the dermal papilla. The dermal papilla provides nutrients for hair growth. Its main component is protein, which will solidify when heated. It cannot continue to provide the nutrients needed for hair growth, and the hair will

wither and fall off. (The one that grows outside the skin is called the hair shaft, the bottom of the hair shaft is the dermal papilla, and the growth environment is the hair follicle)

3. Course formulation:

Do it once every 28-45 days, 3-5 times a course to achieve permanent hair reduction. (If the hair no longer grows after doing it two or three times, don't do it again, and wait until the hair grows out before doing the operation)

4. Clinical status:

8-10 times of fixed-point operation for lip hair and hairline operation, and 15-20 times of sliding on large parts of the body (the number of times is for reference only, depending on the clinical status). The skin is slightly red, there are protruding hair follicles, there is a warm feeling under the skin when you press your fingers, and if the hair is not shaved too cleanly,there is a smell of burnt hair, one or two clinical reactions are enough.

5. Post-operative care:

1) The hair removal area should not be exposed to water within 4-6 hours.

2) Pay attention to sun protection.

3) No sweating, no soaking in hot springs within a week.

4) Appropriate taboos (spicy, stimulating food, tobacco and alcohol).

Product details:

1. Principle of skin rejuvenation:

Using the principle of biological thermal stimulation, it promotes the metabolism of the skin, enhances the circulation function of blood vessels, makes the skin white and tender, and at the same time leads to the activation and proliferation of fibroblasts, stimulates the formation of new collagen, effectively enhances skin elasticity, and achieves a firmness.

2. Course formulation:

Do it once every 30 days, 5 times a course of treatment, and the course of treatment is two months apart.

3. Clinical status:

The whole face is operated 3-4 times, till the skin is slightly red, and it is normal for some customers not to have red skin. (It is normal for there to be a slight tingling in places with spots and moles because there is a lot of light absorption) Body rejuvenation slide 10-20 times, the skin is slightly red.(The number of times is for reference only).

Technical Parameters:

Specifications	Values
Cooling system	Continuously Stand-by Working For 15 Hours
Functions	1. Permanent Hair Removal 2. Skin Rejuvenation 3. Reduction Of Pigmented Lesions 4. Wrinkle Removal 5. Acne Therapy 6. Freckle, Vascular Lesions And Facial Blemish Removal
Display	10.4 Inch TFT Screen
Spot size	1041mm, 7mm, 1010mm
Wavelength	430nm, 530nm, 560nm, 590nm, 640nm, 755nm, Two Small Part Filters
Specification	IPL SH Skin Rejuvenation
Package size	665155cm
Input power	90-130V, 50/60HZ Or 200-260V, 50HZ
Gross Weight	45kg
Working Mode	Multi-Pulse, Single-Pulse Mode, SHR Working

Applications:

Freckle Removal

1. The principle of freckle removal:

The intense pulsed light of a specific wavelength acts on the skin and is selectively absorbed by the melanin in the diseased tissue (the content of melanin in the diseased tissue is much higher than that in the normal tissue). With the excretion of the lymphatic system, part of the epidermal pigment deepens, under the action of light and heat, the spot pigment undergoes thermal coagulation, falls off with the skin metabolism, and the pigmentation disappears; normal skin absorbs less light energy and uses epidermal cooling technology, so normal

tissue does not be damaged. Mainly for epidermal spots have a better effect.

2. Course of treatment formulation:

Do it once every 30 days, 3-4 times as a course of treatment. Afterwards, you can do skin rejuvenation and maintain the skin.

3. Clinical status:

The first full face operation, and then fixed-point operation 5-6 times on the spot. (The number of times is for reference only, depending on the clinical status).To make the spot color deepen and increase, it is best to have a sense of floating. (If you have just started the operation and do not have experience, it is recommended to treat careful, don't do too much treatment)

6) It is forbidden to use keratin peeling products such as tretinoin and fruit acid.

4. Post-operative care:

1) Apply vitamin B5 repair gel for 30-40 minutes after surgery (instant heat dissipation and redness reduction, otherwise may cause blisters).

2) Before the scab falls off, replenish and repair a lot with vitamin B5 repair gel twice a day.

3) If there is a scab, do not wash your face with raw water before the scab is removed, do not use facial cleanser, do not use cosmetics, wipe your face with normal saline or distilled water.

4) Avoid some food within a week, eat less food with dark pigments (soy sauce, coffee, etc.),eat less food containing photosensitive factors (lemon, spinach, etc.), and eat less spicy or stimulating seafood.

5) Pay attention to sun protection and do not expose to the sun during the course of treatment (such as sunbathing, rafting, etc.).

6) It is forbidden to use keratin peeling products such as tretinoin and fruit acid.

After-sales service:

1. One year warranty, if there any problems happens with your machine, we will repair it free of charge.

2. Convenient training, user manual and operation video are available, also, if it is not enough, we can provide the online face to face training.

3. OEM/ODM services, your logo, outshape, language, interface can specially be designed on your machine.

4. After sales service, offer 7*24 hours online service, lifetime free maintainance, technology support forever.

5. Products all be assures safe, no broken, and packed with alumium flight case.

6. Highly reccomand by DHL shipping, our company enjoyed VIP shipping service, all we quoted are the favorable price, and goods will arrive your country within 2-4 working days.

Packing and Shipping:

FAQ:

1) What is the difference between DPL and IPL?
DPL uses more precise narrow-spectrum light for skin rejuvenation treatment, and the photothermal selectivity is greatly improved. Compared with traditional photorejuvenation, the main feature of DPL is precision. The treatment cycle can be greatly shortened. Traditional photons are originally composed of light of multiple wavelengths, generally in the 500-1200nm band. The energy of these lights cannot be concentrated, and the effect will be greatly weakened. The DPL band is between 500-600 nm, and the energy is concentrated, so the effect will be greatly improved.

2) Who is suitable for DPL photorejuvenation?
People with facial stains/People with red blood lines on the face/People suffering from photoaging/People who want to improve their skin quality

3) Will picosecond treatment be painful?
During the treatment process, there will be a tingling and hot feeling, which will be more obvious in areas with more pigment distribution, but it will be very fast and will be over in 5-10 minutes, and the pain is completely bearable.

4) Will I become anti-black after doing Picosecond?
Some people will have anti-darkness, but the time is only 3-7 days, because after the melanin is exploded in picoseconds, it is metabolized from the basal layer to the epidermis of the skin, and the more anti-dark the skin is, the better the effect is. This shows that the pigment of the basal layer is The extraction is very thorough.

5) Is it enough to remove freckles in just one picosecond?
Freckle removal in seconds generally requires about 1 to 5 treatments clinically, with an interval of about 1-2 months between each two treatments. The number of times of Picosecond freckle removal is mainly related to two factors:

1) Different skin types and different types of spots require different Picoseconds treatment times. The number of treatment times is also different for those with large and dark spots.
2) The energy adjustment of the picosecond instrument will also be different whether it uses a honeycomb head or not.

Hot Products

Home IPL SH Elight Machine With Cooling System 8 Wavelength For Permanent Skin Rejuvenation

Contact Us

Changsha GOMECY Electronics Limited

Multi Pulse Working Mode IPL SH Machine With Input Power 50/60HZ Laser Hair Removal