Active Member
|
[China]
Address: 1911 OF SHUIXIU ROAD,KUNSHAN,SUZHOU,JIANGSU,CHINA
Contact name:Lucky Xu
SUZHOU HYUNVAN CNC MACHINERY CO.,LTD. |
|
|
IGL10F / Metal Portable Fiber Laser Marking Machine For Electrical Part
Product Description:
1) Operation system: windowns xp , windowns 7 ,windows8/10
2) Support Characters , digital, series NO, Date codes
3) Various types of fonts are supported. Such as TrueType, JSF(Single line font ), DMF(Dot Matrix Font,One-Dimensional bar code, Two-Dimensional bar code , etc.
4) Common types of images are supported. (bmp, jpg, gif, tga, png, tif…)
5) Common vector images are supported. (ai, dxf, dst, plt…)
6) Flexible variable text : changes the text real time while in laser processing . Excel datasheet is supported.
7) Dometic and Imported fiber laser source.
8) Excellent optical mode, long operating life, up to 100,000hours
9) The highest electro-optical conversion efficiency, up to 80%, but gross power less than 600W
10) Small size, steady, without maintenance, easy to operate
11) High precision, suited for fine processing on all metal and some non-metal.
12) This machine adapts the fiber laser and has high electro- optical conversion rate, the quality of laser beam is good,cooling with air- cooling methods, it has smaller shape, low power and much more energy-efficient.
13) Divergent Angle is about a quarter of the pump laser semiconducto, especially mainly used in precise, fine marking,low using cost, electro-optic conversion efficiency is up to 30%.
Technical Parameters
Laser power | 20W / 30W / 50W |
Laser wavelength | 1064nm |
Laser type | Fiber Laser |
Laser beam quality | M2:1.5 |
Repeat Frequency | 20KHz-80KHz |
Repeat Positioning Accuracy | 0.005mm |
Min linear width | 0.01mm |
Marking Depth | 0.01-0.5mm |
Standard Marking Area | 110×110mm |
Optional Marking Area | 70×70mm/175×175mm |
Rated Power Consumption | less 500W |
Operating Voltage | 220V/50Hz/15A |
Graphic formate supported | PLT, BMP, JPG, PNG, TIP, PCX, TGA, ICO. DXF,etc |
Working temperature | 5-35 centigrade |
Cooling | Air Cooling |
Machine Configuration:
Applications:
Installation environment requirements
1. Prevent vibration: The optical path of the laser marking machine
is very precise, so the working environment must be stable. If the
working environment is vibrating, the optical path of the laser
marking machine will change, and the effect of the laser will be
directly affected!
2. Reduce dust: Because there are many optical components and precise electronic components inside the laser equipment, it is necessary to prevent dust from being adsorbed on the laser and those optical lenses, which has an impact on the quality of the light.
3. Voltage standard: The voltage of the laser welding machine must be in strict accordance with national standards, and the voltage should not have large fluctuations. If voltage fluctuations are recommended to install a voltage regulator, the working environment is recommended to stay away from high-powered equipment.
4. Good grounding: Only correct and good grounding can make it work properly. The laser power supply and welding control system are all digitally controlled by industrial microprocessors. Only good grounding can ensure their normal and stable operation.
