Active Member
|
[China]
Address: 1911 OF SHUIXIU ROAD,KUNSHAN,SUZHOU,JIANGSU,CHINA
Contact name:Lucky Xu
SUZHOU HYUNVAN CNC MACHINERY CO.,LTD. |
|
Portable Mini Metal Fiber Laser Marking Machine With Ezcad 10W 20W 30W 50W
Product Description:
• Industrial machine type, popular layout, excellent effect of dust
proof.
• All-in–one design of electric cabinet and working table.
• High space between lifting table and working table, especially
used for marking on small size work piece.
• Packing size: 940*790*1550mm Net weight: 120KGS Gross weight:
170KGS
Technical Parameters:
Laser power | 10w(20W,30W,50W optional) |
Laser wavelength | 1064nm |
Laser type | Fiber Laser |
Laser beam quality | M2:1.5 |
Repeat Frequency | 20KHz-80KHz |
Repeat Positioning Accuracy | 0.005mm |
Min linear width | 0.01mm |
Marking Depth | 0.01-0.5mm |
Standard Marking Area | 110×110mm |
Optional Marking Area | 70×70mm/175×175mm |
Rated Power Consumption | less 500W |
Operating Voltage | 220V/50Hz/15A |
Graphic formate supported | PLT, BMP, JPG, PNG, TIP, PCX, TGA, ICO. DXF,etc |
Working temperature | 5-35 centigrade |
Cooling | Air Cooling |
Machine Configuration:
Applications:
• Electrical Engineering and Electrical part and component
• Telecommunication product and Mobile
communications(cover,battery,keyboard)
• Jewelry,eyeglass,clocks and craft
• Building materials,PVC pipe
• Car motor car spare part
• Instrument and meters and cutting tool
• plastic case
• aviation and aerospace,
• military product,
• hardware fitting and accessory
• sanitary appliance
• stationery,
• food and beverage
• medicine package andmedical instrument
• solar Pv industry: silicon wafer
• other: rubber epoxy resin ABS Printing ink Coating film
• Desktop Fiber Laser Marking Machine
Installation environment requirements
1. Prevent vibration: The optical path of the laser marking machine
is very precise, so the working environment must be stable. If the
working environment is vibrating, the optical path of the laser
marking machine will change, and the effect of the laser will be
directly affected!
2. Reduce dust: Because there are many optical components and precise electronic components inside the laser equipment, it is necessary to prevent dust from being adsorbed on the laser and those optical lenses, which has an impact on the quality of the light.
3. Voltage standard: The voltage of the laser welding machine must be in strict accordance with national standards, and the voltage should not have large fluctuations. If voltage fluctuations are recommended to install a voltage regulator, the working environment is recommended to stay away from high-powered equipment.
4. Good grounding: Only correct and good grounding can make it work properly. The laser power supply and welding control system are all digitally controlled by industrial microprocessors. Only good grounding can ensure their normal and stable operation.
