Active Member
|
[China]
Address: middle cheng Rd, Jimo, Qingdao, China
Contact name:Emily Meng
Qingdao Aoshuo CNC Router Co., Ltd. |
|
|
Fiber Metal Laser Cutting Machine 1000W For Carbon Sheet
Overview
Fiber Optic Sheet Metal Laser Cutting Machine has equiped with a a
big sealed working house, which can protect the worker during
cutting operation. The laser power is very high, reaching 2000W,
which can cut very thick metal sheet.
The laser cutter consists of 5 parts ,the machine bed host,
electrical control, water cooling unit, air cooling system and
Exhaust system.
The machine bed host is the main part of the whole laser cutting
machine. Cutting function and cutting accuracy of laser cutting
machine are realized by it.
The electrical control system is an important part of ensuring that
all kinds of graphics running tracks, which is composed of the CNC
and the low-voltage electric system.
Other auxiliary peripheral equipment including large water chiller,
cooling system, exhaust system and power supply
Advantages
1. Great Performance: Identical cutting quality on any cutting
point is realized through fiber transmission.
2. High Efficiency: The rapid cutting speed is two times higher
than that of CO2 laser machine.Its use-cost is low.
3. Low Consumption of Gas: Laser cutting does not make any gas
because of the specific cutting technology on steel plate.
4. Low Consumption of Energy: It is environment-protecting and
energy-saving.Its power consumption is reduced by 20%-30% compared
with that of CO2 laser machine.
5. Maintenance-free: Reflecting lens is not needed for fiber
transmission.Much time is saved when optical path is adjusted.It is
maintenance-free
6. Install Proportional Valve: Use software to change the air and
control the air pressure automatically, no need to change the air
manually, it can save you much time;
7. Stable working table: Use 8mm thick steel side board, around 3.5
tons in weight;
8. Dual drive, aging treatment, stress relief test to ensure long
time fast running without changing shape;
project | parameter | unit | |
Processing size | (L) | 3000 | mm |
(W) | 1500 | mm | |
X/Y axis positioning accuracy | ±0.05 | mm | |
X/Y axis repeatable positioning accuracy | ±0.03 | mm | |
X/Y maximum positioning speed | 80 | m/min | |
Laser generator power | 1000 | W | |
Cutting capacity: carbon steel plate | 12 | mm | |
stainless steel | 6 | mm | |
aluminum | 4 | mm | |
brass | 3 | mm | |
Maximum acceleration of X/Y | 1.5 | G | |
Motion stroke (axis) | X | 3020 | mm |
Y | 1520 | mm | |
Z | 150 | mm | |
Number of phase | 3 | ||
Power rating | 380 | V | |
frequency | 50 | Hz | |
Cutting parameter
| Material / Laser Power | 500W | 750W | 1000W | 2000W | 3000W | 4000W |
| Carbon Steel | 6mm | 8mm | 10mm | 16mm | 20mm | 22mm |
| Stainless Steel | 3mm | 4mm | 6mm | 10mm | 12mm | 15mm |
| Aluminum | 1mm | 3mm | 4mm | 6mm | 8mm | 10mm |
| Brass | 1mm | 2mm | 4mm | 6mm | 8mm | 8mm |
| Copper | 1mm | 2mm | 3mm | 4mm | 5mm | 6mm |
| Galvanized Steel | 1mm | 2mm | 4mm | 6mm | 8mm | 10mm |
Gantry type mechanical structure, compact taking up small area A, Five tons in weight, 16mm Thickness square steel tube and 25mm(T) steel panel. B, Beautiful and dignified in appearance, industry technics and aging treatment; high working efficiency and steady performance, it can obtain more than 10 years lifespan. Working table 1,High precision CNC fixed working table with Rack Pinion contruction; 2, Special designed small pneumatic wheel carriers ,the metal sheet to be cut may slide along the machine body for easy loading; 3,Strip working table; Aluminum material, put cutting sheet on it . |
500W/1000W/2000 Fiber Laser Generator Ytterbium Fiber Laser, Low Energy Consumption: Save energy and protect environment. Photoelectric conversion rate is up to 25-30%. Low electric power consumption, it is only about 20%-30% of traditional CO2 laser cutting machine. Lifetime is more than 100,000 hours, almost free maintenance. 1. Laser output power: 500W/1000W 2. Laser wavelength: 1070nm 3. Output energy regulating: 10%~100% 4. Input Power: less than 1.5KW-1.9KW 5. Working temperature: 16~35ºC |
Application
It has been widely used in the field of aviation and space, weapon,
warship, petrifaction, medical, instrument, micro-electron, auto
mobile car and so on.
