Active Member
|
[China]
Address: #22 Building, #13 Mintai Road, Shunyi District, Beijing City, China,101300.
Contact name:EUROPE
Beijing JCZ Technology Co. Ltd |
|
|
High speed Glass Marking control card For IPG Laser source/ EZCAD Laser Control card
Description:
| CON3: DB9 flying standard interface | ||
| Pin. | Name | Description |
| 1 | IN8 | Input port 8 |
| 2,6 | IN9+,IN9- | Input port 9 positive |
| 3,7 | BCODEP/ BCODEN | Input port 9 negative |
| 4,5 | ACODEP/ACODEN | Encoder input B+/B- |
| 8 | VCC | +5V output |
| 9 | GND | Ground |
main feature
Galvo control signal is digital, which can be connect to most scanhead directly.
on-the-fly marking feature. A encoder can be used to surveillance the pipeline speed
real-timely.
Multiple system function. One computer can control up to 8 control board to mark different
pattern simultaneously
Extension axis(step motor or sever motor): two set of direction/pulse signal can be used to
control 2 step(server) motors.
16 general input signals(TTL campatible): In0-In13, XORG0(IN14), YORG0(IN15).
14 general output signals(TTL campatible): Out0-7 coming out of Con5. Out8-13 coming out
of CON2. Out0 - 3 ,out8 and out13 are TTL outputs. Out4-7 can be configured as OC
output or TTL output by jumpers. Out 9-12 are OC outputs.
ReMark(REpeat MARKing signal): in the case of high speed marking of a same pattern, a
foot pedal can be connected to this pin. If some variables are in the pattern or the pattern is
too big for the cache in board, the foot pedal can be only connect to general input pins.
Laser signal: we provide both high level effective and low level effective signals.
PWM signal: both differential and TTL signal is provided.
A specified red light pointer signal is now added.
Two analog signal that control power/frequency is now added.
Using USB2.0 specifications.
Applications:
| Model | CO2 |
| Connect Method | USB2.0 |
| Galvo control signal | Can be directly connected to a universal digital galvao |
| Number of Input Ports | 16 universal input ports |
| Number of Output Ports | 14 way TTL/ OC |
| Remark Signal | Cache content repeated engraving |
| Extended Axis | Support for 2 extension axis |
| Flight Marking | Support |
| Multi-head Carving | Support |
| Software Second Development | Support |
| Suitable Laser | CO2 Laser Engraving Machine / YAG / UV Laser Machine |
| Applicable Material | Glass, Plastic, Wood, Rubber, Paper |
| Support Operating System | XP WIN7 WIN8 WIN10 32/64 Bit System |
| Built-in Encryption Chip | Support |
| Power Supply | 5V 3A |
