Active Member
|
[China]
Address: ROOM 402 BUILIDING 5 SOARING BUILDING FUFENG ROAD FENGTAI DISTRICT BEIJING CHINA
Contact name:John
Beijing ADM Beauty Laser CO.,LTD. |
|
|
tattoo eraser machine picosure laser equipment for wrinkle pigmentation removal machine
Operation and Treatment process:
A. Before treatment
a).Classification of skin: it's safe and effective to the white, brown ,yellow or the other skin color.
b). Clean the patients’ skin, to eliminate the perfume and cosmetics. Take off jewelry, such as necklaces, earrings and other reflectors.
c).Operator and patients are wearing protective glasses, make skin disinfection for patients’ treatment area.
d).Operator adjust the energy according to the patients’ skin type, skin sensitivity, skin lesions and color depth,etc.
e). During the treatment,Please keep the treatment head perpendicular to the skin surface when shot. Please test the area of the ear skin before treatment,shot 2 to 3 times to observe if has any reactions(based on the mild skin redness)
B. Operation steps:
a). Connect the power supply
b). Release emergency stop switch, Turn the key switch to right.
c). Display interface shows 3 wavelengths 1064nm ,755nm and 532nm button to select the wavelength to be used
d). Touch the screen to adjust the wavelength, energy and frequency; Adjust the treatment required for proper energy value. Turn articulated arm output port to the treatment site, control the distance between arm output port and therapy site, namely control spot size . Then step on the pedal switch to do treatment.
After treatment
1. During the treatment and after treatment, patients may have slight pain feeling, treatment area skin becomes white, Slight oozing of blood bleeding. It’s normal, please don’t be too nervous.
2. If treatment area have scabby phenomenon after treatment, that will generally takes 7 to 14 days to Fall off automatically. Do not remove it artificially, so as not to slow the skin healing speed or cause pigmenation.
3. After the treatment, patients are not allowed to eat the spicy food and Photosensitive food within 2 weeks, such as sauce, coke, seafoods, capsicum etc.
4. During the period of scrabbing, treatment area is avoid touching water.
5. The minority individual’s skin may appear normal pigmentation after treatment, generally in 1 to 3 months will gradually subside.
6. After treatment, patients should avoid exposure to sunlight and sunlight, pay attention to the sun, so as to avoid pigmentation deepened.
Working conditions
(1), temperature 10 ～ 30 ℃;
(2), the relative humidity: ≤ 75%;
(3), the atmospheric pressure: 860 ~ 1060hpa;
(4), the use of power: AC220V + 10%, 50Hz + 2%;
(5), cooling water: the deionized water or pure distilled water
Basic parameters
(1), geometry size (excluding joint arm, length * width * height,
mm): 870 x 390 x 870mm;
(2), the net weight: 75kg;
(3), power consumption: 800VA;
(4), the overcurrent protection device models: 220V/110V, 10A
(6), the work of laser wavelength: 1064nm; 532nm,755nm
(7), the laser pulse width:8 ± 3ns;
(8), the laser output frequency: 1-10hz;
(9), the maximum output energy of single pulse: ≥ 800mJ;
(10),eye hazard distance: NOHD is 100m, the sealing operation
chamber is harmful to eyes, must wear protective goggles!
(11), cooling: built-in closed circulation water-cooled;
(12), operation modes: continuous operation with intermittent
loading;
(13), the spot can be continuously adjusted.
Optical and electrical Performance
(1), the laser output instability: ST ≤ ± 10%;
(2), the output energy reproducibility: Rj<10%;
(3), the laser output energy and preset value display error: < ± 20%;
(4), the operation area spot diameter: 2- 10mm continuously adjustable range;
(5), the cursor focusing accuracy: the error ≤ ± 0.5mm;
(6), aiming the laser output power of Pc should meet: 0.1mW ≤ Pc ≤ 5mW
(7), multi joint light guide arm adjusting range: on a level surface ≥ 45 º, vertical height from the ground 60cm to 80cm .
Functions of the whole machine
(1), the single pulse energy level display and adjustment;
(2), pulse energy level display and adjustment;
(3), pulse frequency and display adjustment;
(4). The working state and display adjustment.
Safety requirements
(1), protection against electric shock: according to the GB9706.1 - 1995 <medical electrical equipment Part 1: General
requirements for safety >related provisions B type equipment of the Class I .
(2), laser radiation protection: Conform to GB72471995 <radiation safety of laser products, equipment classification,
requirements and user's Guide> radiation safety requirements of class 4 medical laser products.
(3) Please do fill distilled water into the machine before start it. Don’t start the machine if its water tank is not filled with
water.
The applications of the Picosure laser machine :
A. Remove tattooed eyebrow:
1. Firstly,find out if the customers have a story of hypertrophic
or keloid scar formation, or have had chemical peels or
allergic skin, if they have covered eyebrow or have removed their
tattooed eyebrows by other ways before.If one of this
condition,a large spot size can be used for removing the eyebrow
tattoo. (It is normal there have a slight oozing of blood
when shot on the tattooed eyebrow,please don’t worry)
2. Before removing eyebrow tattoo,shave the eyebrow firstly.
Shooting distance should be 3-5cm.
3. 755nm or 1064nm laser tip is used to remove black or blue
tattooed eyebrow. Choose the large energy to break up the
pigment further and promote the absorption of the tissue.Make
another check-up in one month and a half to see if there is
pigmentation in face.If so,please take another treatment.
4. The pink eyebrow tattoo can be removed with 532nm laser tip.
5. Remove the scarlet red or brow tattoo with 755nm or 1064nm laser
firstly,and do it again with 532nm laser.Then take
another treatment with the laser 532nm laser in one and a half
month .
6. When removing eyebrow tattoos,removing medical liquids,or if
there are flaws on skin,let the treatment tip get closer to
skin and tilt the treatment head. One treatment is okay, in a month
and a half carry on treats once more.
7. If the eyebrow tattoo has existed for a long time,and because
the pigment contains iron ion, a light-colored mark may be
left after the blue and black pigment is eliminated.One more
treatment is needed in one and a half month.
8. Don’t stop treatment until the pigment is completely
removed.Interval time is one and a half month.
B. Remove Tattoo:
1. Frequency setting:2 to 4HZ; Shooting distance(treatment tip to
skin) is 3-5cm,and recommend use small spot size.
2. The operation processes are same with ‘Remove tattooed eyebrow’.
3. For large-area tattoo,it is okay to remove it at one time in
order to avoid skin swelling and blister
4. Don’t stop treatment until the pigment is completely removed
completely.
C. Remove Tattooed lipline:
1. When removing tattoo lip lines,chose one corner of the mouth
first for experiment.For example, if there has iron in the
pigment With the laser shot, the lipline will get black immediately
. Further treatment is not allowed.
2. Frequency setting: 2 to 4HZ and shooting distance : 4-5 cm is.
3. For black,scarlet red and the deep coffee lips,please use 1064nm
or 755nm tip and do second treatment with laser
532nm.In one and a half month, take another treatment with 532nm
tip.
4. For pink and red lips,remove with laser of 532nm
5. Notice:Further treatment to the lips tattoo should be last for
half year,otherwise the treatment will fail.
6. Don’t stop treatment until the pigment is gone completely,interval time:45 days.
D. Remove nevus spilus
1. Frequency setting : 2 to 4HZ and shooting distance :3-5 cm
2. Remove the age spot with 1064nm or 755nm at first,When it
bruising,stop treating.If it is not effective,please use laser of
532nm for a chance.
3. Remove the nevus with 1064nm or 755nm.If it is not effective,use
laser of 532nm for a chance and carry on the treatment
till the bruising end point is reached.
4. Don’t stop the treatment until the pigment gone.We suggest
treatment in a one and a half month cycles
E. Remove tattooed eyeline
1. Strict eyeball protection measures is a necessary.
2. Frequency setting: 2 to 4HZ,select low energy and small light
spot and keep the shooting distance of 3-5 cm .The operator
can use one-centimeter-thick g gauze to cover the patient’s
eyeball,led eye shields or contact lenses.
3. When removing the upper eyelid line,ask the patient to close the
eyes tightly,and let the eyeball move upwards.Press the
gauze with forefinger,press and push the upper eyelid upwardly;push
the lower eyelid downwardly to reveal the lower line
with middle finger and carry on prompt treatment with light
frequency of 5HZ.Please tell the patient not to move but when
he or she can’t endure,the doctor should stop temporarily.
4. When removing the upper line,ask the patient to close eyes
tightly,and let the eyeball move downwards,
Press the gauze with middle finger,press and push the lower eyelids
downwardly;push the upper eyelid upwardly to reveal
upper line with the forefinger .
5. Do your best to avoid anesthetic.Carry on the treatment on
darker area in 45 days.
6. Don’t stop treatment until the pigment is gone completely,We
suggest treatment in a one and a half month cycle
F. Remove birthmark: same as ‘remove tattoo’
