500N Intelligent Tensile Testing System Medical Computer Controlled

Intelligent tensile testing system controlled by medical computer

Product introduction:
Equipment Overview: it is mainly suitable for testing and analyzing mechanical properties of metal, nonmetal and composite materials with test load less than 1kn. With three closed-loop control modes of stress, strain and displacement, the maximum force, tensile strength, bending strength, compressive strength, modulus of elasticity, elongation at break and yield strength can be obtained. According to GB, ISO, JIS, ASTM, DIN and other international standards, test and provide test data. The test data curve can be superimposed, analyzed, stored, printed, plotted, and a complete report sheet can be printed for process adjustment and production control. It meets the requirements of GB / t16491-2008 electronic universal testing machine. Modern industrial design and ergonomics are fully considered in the structure of the machine. The shell adopts alloy frame structure to enhance the stiffness coefficient and double-layer metal baking paint on the surface, so as to prolong the service life of the main engine and beautify the appearance. The upper and lower space can be applied.
Five products can be tested at the same time;
Tensile test range: 0.500n, error no more than ± 0.01N, resolution 0.001N;
Tension setting range: 0 ~ 500N, error not more than ± 0.01N;
Force measurement accuracy: within 0.5% of indicated value;
Stroke: ≥ 1000mm