Home Companies shanghai kerang technology co ltd

Static Flexibility Cable Testing Machine For Completed Flexible Cables

shanghai kerang technology co ltd
Active Member

Contact Us

[China] country

Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China

Contact name:iven

Inquir Now

shanghai kerang technology co ltd

Static Flexibility Cable Testing Machine For Completed Flexible Cables

Country/Region china
City & Province shanghai shanghai
Categories Cable Manufacturing Equipment
InquireNow

Product Details

Static Flexibility Tester HDX1303

 

 

Feature:A sample with a length of 3m±0.05m shall be tested in an apparatus similar to that shown in figure 2. Two clamps, A and B, shall be located at a height of at least 1.5m above ground level. Clamp A shall be fixed and clamp B shall move horizontally at the level of clamp A. The ends of the sample shall clamped vertically (and remain vertical during the test), one end in clamp A, the other in the movable clamp B which shall be at a distance /=0.20m from clamp A. The cable takes roughly the shape indicated figure 2 by the dotted lines. The movable clamp B shall then be moved away from the fixed clamp A until the loop formed by the cable takes the shape, indicated in figure 2 by the heavy outline, of the U enclosed wholly between two plumb lines through the clamps and set up tangentially to the external generatrix of the cable. This test shall be done twice, the cable being turned in the clamp, after first test, through 180°.

 

Parameters:

A, B clamping head initial distance200mm
A and B, shall be located at a height above ground levelAt least 1.5m
Sample length3±0.05m
The cable being turned in the clamp180°
Number of testing times2
 

Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.

Application:It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and cables having more than 18 cores laid up in more than two concentric layers.

Test sample:Completed flexible cables.

 

 

Services:


1. Do not worry, it will be best services.
2. Consult us immediately.
3. We will get back to you the first time.
4. It's my pleasure.

 

Primary products:

 

Laboratory Test Equipment

Appliance Test Equipment

Medical Device Testing Equipment

Waterproof Test Equipment

Dust Testing Equipment

Flammability Testing Equipment

Electric Testing Equipment

Impact Testing Machine

Cable Testing Machine

Vibration Test Equipment

Light Testing Equipment

Communication Test Equipment

Plug Socket Tester

Leak Test System

 

We are looking forward to long term cooperation with customers, we will make best service and after sales service for all of our customers. If you have any inquiry, please don’t hesitate to contact us. We will reply you at the first time as we can.

Hot Products

Electric Iron Drop Test Equipment HJ0610 Standard: Clause 21.101 of IEC 60335-2-3 Household and ...
Electric Wire Abrasion Test Apparatus HDX1304 Parameters: Power supply AC220V 50Hz Fixed shaft ...
Electric Wire Abrasion Test Apparatus HDX1304 Feature:This test shall be made on three pairs of ...
Electric Wire Abrasion Test Apparatus HDX1304 Standard:IEC60245-1 Rubber insulated cables-Rated ...
Static Flexibility Tester HDX1303 Feature:A sample with a length of 3m±0.05m shall be tested in an ...
Static Flexibility Tester HDX1303 Parameters: A, B clamping head initial distance 200mm A and B, ...