Active Member
|
[China]
Address: Zone C, 2 / F, building 3, 69 Huafang Road, Qingpu District, Shanghai, China
Contact name:iven
shanghai kerang technology co ltd |
|
|
Static Flexibility Tester HDX1303
Our company has a core team with years of technology development,
technology transfer, technical consulting, technical services
experience, providing Appliance Test Equipment, Medical Device
Testing Equipment, Waterproof Test Equipment, Dust Testing
Equipment, Flammability Testing Equipment, Electric Testing
Equipment, Impact Testing Machine and so on.
Over the years, we focus on Laboratory Test Equipment, With
enthusiastic, professional and efficient production design and
sales service team. The quality of our products is checked by the
inspection of the exported products and 100% of the total
inspections are conducted. Choosing us means choosing high quality
products and excellent services.
Feature:A sample with a length of 3m±0.05m shall be tested in an apparatus similar to that shown in figure 2. Two clamps, A and B, shall be located at a height of at least 1.5m above ground level. Clamp A shall be fixed and clamp B shall move horizontally at the level of clamp A. The ends of the sample shall clamped vertically (and remain vertical during the test), one end in clamp A, the other in the movable clamp B which shall be at a distance /=0.20m from clamp A. The cable takes roughly the shape indicated figure 2 by the dotted lines. The movable clamp B shall then be moved away from the fixed clamp A until the loop formed by the cable takes the shape, indicated in figure 2 by the heavy outline, of the U enclosed wholly between two plumb lines through the clamps and set up tangentially to the external generatrix of the cable. This test shall be done twice, the cable being turned in the clamp, after first test, through 180°.
Parameters:
| A, B clamping head initial distance | 200mm |
| A and B, shall be located at a height above ground level | At least 1.5m |
| Sample length | 3±0.05m |
| The cable being turned in the clamp | 180° |
| Number of testing times | 2 |
Standard:IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.2 and Figure 2 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.
Application:It is used for checking mechanical strength of completed flexible cables. This test does not apply to flexible cables with cores of nominal cross-sectional area greater than 4mm2 and cables having more than 18 cores laid up in more than two concentric layers.
Test sample:Completed flexible cables.
Our Service
7X24-hour Telephone Consulting Service is available.
Reply and solution will be provided in 8 hours upon customer’s service request.
After-sales Support is available on a 7X24-hour basis, leaving no worries for customers.
Quality inspection from raw material to production, and delivery.
Professional quality control person, to avoid the unqualified products flowing to customer.
Strict inspection to Raw material, production, and delivery.
Full series of equipment in quality laboratory.
We are looking forward to long term cooperation with customers, we will make best service and after sales service for all of our customers. If you have any inquiry, please don’t hesitate to contact us. We will reply you at the first time as we can.
