Active Member
|
[China]
Address: 101 and 5th Floor, Building 1, No. 68,18th Road, Guangming Hi-Tech Park, Tangjia Community, Fenghuang Street, Guangming District, Shenzhen 518107 ,China
Contact name:Aimee li
Labnovation Technologies, Inc. |
|
|
LD-560 HbA1c Rapid Test Analyzer Big Capacity Fully Automatic HbA1c Analyzer
Intended Use
The Fully Automated HbA1c Analyzer is used in conjunction with suitable reagents for the quantitative detection of glycosylated hemoglobin (HbA1c) in human blood.
Specifications
| Model | LD-560 |
| Method | HPLC (High Performance Liquid Chromatography) |
| Parameters | HbA1c, HbF, HbA1a, HbA1b, HbA0; HbA2 (optional) |
| Test Speed | 90 seconds per test |
| Wavelength | 420nm |
| Sample Type | Whole Blood, Pre-diluted blood |
| Autoloader Capacity | 20 tubes |
| Reagents Kit | Eluent A, Eluen B, Hemolysis, Chromatography Column |
| Precision | CV＜2% |
| Column Capacity | 3000 tests |
| Report Range | 3-18% |
| Working Condition | Temperature: 15-30℃, Humidity: 30-85% |
| Voltage | 100-240VA |
| Frequency | 50/60Hz |
| Dimensions | 378mm×380mm×510mm |
Feature
PRINCIPLE
Using high performance liquid chromatography (HPLC), the stationary
phase used is a weakly acidic cation exchanger. Glycosylation of
hemoglobin will result in the loss of cations on the surface of
hemoglobin without being charged, and non-glycosylated hemoglobin
has a positive charge. According to the different charged
properties of hemoglobin, eluents with different pH values and
ionic strengths are used sequentially, and several hemoglobin
components including HbA1c are separated by high performance liquid
chromatography. Each component is detected by a single-wavelength
colorimeter, and the detected data is processed by a computer to
calculate the percentage content of HbA1c in the total hemoglobin.
Performance Parameters
Accuracy: The accuracy is tested with reference materials as samples, and
the relative deviation of the test results should be within ±5%.
Repeatability: For samples with a test concentration of 4%-6%, the sample
coefficient of variation (CV) of the test results is not greater
than 2.0%.
Linear range: Within the range of 3%-18% of glycosylated hemoglobin, the linear
correlation coefficient R value of the test results should not be
less than 0.9900.
Stability: Within 8 hours after the analyzer is turned on and stabilized, the
same normal sample is tested, and the relative deviation of the
test results is not more than ±3.0%.
Carrying pollution: The carrying pollution rate of the analyzer should not be greater
than 2.0%.
Certificated
