Active Member
|
[China]
Address: No.1 Yanfa 1st Road, Songshan Lake High-tech Industrial Development Zone, Dongguan City 523000, Guangdong Province, China.
Contact name:Wu
ATMARS INDUSTRTY CO., LIMITED |
|
|
Environmental Stress ESS Test Chamber for Temperature Cycling Test Durable
What is an ESS TEST CHAMBER ?
Environmental Stress Screening (ESS), also known as AST (Accelerated Stress Testing), HALT (Highly Accelerated Life Test), HASS (Highly Accelerated Stress Screening) or Burn-in test.
ATMARS AFT Series Environmental Stress Screening ESS test chambers are designed to meet a range of ESS testing applications so as to improve quality, reliability and profitability by eliminating defective p-roducts. In turn, improved product quality and reliability will also lead to improved customer satisfaction, making it easier to maintain a customer base and to gain new customers.
Our standard ESS chambers models workspace volumes include: 225L, 408L, 500L, 800L, and 1000L. And interior dimensions can be customized according to specimen sizes and your testing requirements.
Optional humidity range: 20% RH to 98% RH (Lower humidity is available)
Optional temperature change rate: 1～30℃/min.(AVERAGE) or 1～20℃/min.(LINEAR)
AGREE chambers for HALT / HASS testing
| Techinical Specifications of AFT-800D SERIES ESS Test Chambers Performance is based on ambient temperature +25 ℃ or circulating water temperature +25 ℃, empty load no specimen. | |||||
| Model | AFT- | ||||
| 800D-5 | 800D-10 | 800D-L5 | 800D-L10 | ||
| Performance | Temperature Range | -70℃ ~ +150℃ | |||
| Fast Temp. Change Range | -55℃ ~ +85℃(Average change) | -55℃ ~ +85℃(Linear change) | |||
| Temp. Change Rate | 5℃/min | 10℃/min | 5℃/min | 10℃/min | |
| Temperature Fluctuation | ±0.5℃ (at a steady temperature) | ||||
| Temperature Uniformity | ±2.0℃ | ||||
| Temperature Deviation | ≤±2.0℃ | ||||
| Workspace Volume | 800L | ||||
| Workspace Dimensions (WxDxH)mm | 1000x800x1000 | ||||
| Exterior Dimensions (WxDxH)mm | 1550x1800x2200 | 1700x2300x2400 | 1700x2300x2400 | 1700x2450x2400 | |
| Material | Interior | #SUS304 Stainless Steel | |||
| Seal | Imported silicone seal | ||||
| Insulation | Expanded foam & fiberglass | ||||
| Exterior | Cold-rolled steel with powder coated surface | ||||
| System | Heating | Nichrome resistance wire heater | |||
| Refrigeration | Mechanical Refrigeration System | ||||
| Controller | Programmable Touch-screen Controller | ||||
| Noise Level | ≤70dB (A-weighted sound pressure level measured at a distance of 1.0 meter) | ||||
| Allowable ambient conditions | Temperature: +5℃ to +35℃; Relative humidity: ≤85％RH (No condensation); Air pressure: 86kPa to 106kPa. | ||||
| Power Supply | AC 380 (1±10％)V (50±0.5)Hz 3 Phase 4 Wire plus Earth Wire | ||||
| ▲Custom options are available. | |||||
Optional Accessories
Number, size, position and shape (round, glove or square) of
through-wall access ports
Additional viewing windows
Additional shelves, custom fixture or basket
Door Interlocks
Inner glass door with glove ports
Custom colors
Water cooled condenser or air cooled condenser
Remote refrigeration system
Boost cooling system, LN2 or CO2
Quiet package
Low humidity
Water purification and recirculation system
Humidity water demineralizer
Desiccant dehumidifier / air dryer
Electronic humidity sensor
Dry air purge / Dry nitrogen purge for low humidity or drying
Oxygen Monitor
Test Standards Conformance
GB/T 10586-2006 Specifications for damp heat chambers
GB/T 10592-2008 Specification for low/high temperature test
chambers
GB/T 2423.1-2008 Environmental testing - Part 2: Test methods -
Tests A: Cold
GB/T 2423.2-2008 Environmental testing - Part 2: Test methods -
Tests B: Dry heat
GB/T 2423.3-2016 Environmental testing—Part 2: Testing method—Test
Cab: Damp heat,steady state
GB/T 2423.4-2008 Environmental testing for electric and electronic
products - Part 2: Test method - Test Db: Damp heat, cyclic
(12h+12h cycle)
GB/T 2423.22-2012 Environmental testing - Part 2: Tests methods -
Test N: Change of temperature
GJB 150.3A-2009 Laboratory environmental test methods for military
material - Part3: High temperature test
GJB 150.4A-2009 Laboratory environmental test methods for military
material - Part4: Low temperature test
GJB 150.9A-2009 Laboratory environmental test methods for military
material - Part9: Damp heat test
IEC 60068-2-1:2007 Environmental testing - Part 2-1: Tests - Test
A: Cold
IEC 60068-2-2:2007 Environmental testing - Part 2-2: Tests - Test
B: Dry heat
IEC 60068-2-14:2009 Environmental testing - Part 2-14: Tests - Test
N: Change of temperature
IEC 60068-2-30:2005 Environmental testing - Part 2-30: Tests - Test
Db: Damp heat, cyclic (12 h + 12 h cycle)
IEC 60068-2-78:2012 Environmental testing - Part 2-78: Tests - Test
Cab: Damp heat, steady state
