Active Member
|
[China]
Address: No.1675, Fengxiang Road, Baoshan City Industrial Zone, Baoshan District, Shanghai, China
Contact name:Olivia
Kata Valve (Group) Co., Ltd. |
|
|
3 Way Stainless Steel Diaphragm Valve with RF Flanged Connection
| Advantages | Disadvantages |
| Extremely clean | Can only be used in moderate temperature (-60 to 450ºF) |
| Leak proof seal | Can only be used in moderate pressures (approximately 300psi) |
| Tight shut-off | Cannot be used in multi-turn operations |
| Easy maintenance | No industry standard face-to-face dimensions |
Repairs can be made without interrupting pipe line | The body must be made of corrosive resistant material |
| Reduce leakage to the environment |
A diaphragm valve is a linear motion valve that is used to start/stop and control fluid flow.
Diaphragm valves use a flexible diaphragm connected to a compressor by a stud which is molded into the diaphragm. Instead of pinching the liner closed to provide shut-off, the diaphragm is pushed into contact with the bottom of the valve body to provide shut-off. Manual diaphragm valves are ideal for flow control by offering a variable and precise opening for controlling pressure drop through the valve. The handwheel is turned until the desired amount of media is flowing through the system. For start and stop applications, the handwheel is turned until the compressor either pushes the diaphragm against the bottom of the valve body to stop flow or lifts off the bottom until flow is able to pass through.
The diaphragm is connected to a compressor by a stud molded into the diaphragm. To start or increase flow the compressor is moved up by the valve stem. To stop or slow flow, the compressor is lowered and the diaphragm is pressed against the bottom of the valve. Diaphragm valves are excellent for controlling the flow of fluids containing suspended solids and offer the flexibility of being installed in any position. Weir-type diaphragm valves are better at throttling than straight though diaphragm valves because the design's large shutoff area along the seat gives it the characteristics of a quick-opening valve. The diaphragm acts as the gasket of the valve to seal against leaks between the body and bonnet cap.
The flow transfer and control category covers a wide spectrum of products designed to facilitate, control, maintain, meter, or read the flow of material through hoses, pipes or tubing. The material in question can be liquid, gaseous, or semi-solid (colloids and slurries). The following families fall within this category: valves, valve actuators and positioners, dispensing valves, pumps, flow sensing, level sensing, density and specific gravity sensing, viscosity sensing, and miscellaneous related products.
Diaphragm valves are especially suited for handling corrosive fluids, fibrous slurries, radioactive fluids, or other fluids that must remain free from contamination. Since the diaphragm does not come into contact with the media the valve can be used with sticky or viscous fluids, which can get stuck or clog other types of valve mechanisms.
