|
[China]
Trade Verify
Address: No.88 Ningbo road, Garden of New Hi-Tech Industry, Changshu, Jiangsu, China
Contact name:Julie
Light Country(Changshu) Co.,Ltd |
|
Verified Suppliers
|
|
|
KSD301 Bimetal Thermal Protector With Black Phenolic Case, Loose Bracket, TUV VDE For VALTOO
1. About us.
Light Country Co., Ltd. was founded in 1985 in Taiwan, Dongguan branch in 1997, Changshu site in 2004.
We dedicate on bimetal thermal protector and rocker switch.
These parts are widely used in household appliance, motor vehicles, office equipment, industrial facilities and so on.
To provide customer best service, we’re with integration of R&D, production, sales and post-sales as well.
Our factory already got ISO9001, ISO14001, IATF16949 certificates.
Our products already got CQC, UL/CUL, VDE, TUV, SEMKO, NEMKO certificates, comply with ROHS/REACH regulations.
We promise reasonable price, stable quality, timely delivery and superior service.
2. Why choose our KSD301 Bimetal Thermal Protector?
1) High precision, rapid heat transmission, high sensitivity for excellent thermal protection.
2) Good quality, every product will be tested before shipping, extremely high temperature pass rate.
3) Easy mounting.
4) Many choices for components used on bimetal thermal protector, always support customized production.
5) Reasonable cost and excellent service.
3. Parameters and Specification.
| Factory | Light Country(Changshu) Co.,Ltd. |
| Product | KSD301 Bimetal Thermal Protector |
| Type | Automatic Reset |
| Special handling process | Adhesive on rivet to prevent oxidation and simple waterproof |
| Electrical Rating | 10A 250V, 16A 250V, 15A 125V. |
| Operating Temperature | 0℃~150℃ |
| Differential | 8℃ or more |
| Endurance | 100,000 cycles |
| Bracket | Loose U type bracket |
| Case material | Phenolic |
| Circuit Resistance | 50mΩ or less |
| Insulation Resistance | 100MΩ or more(DC 500V) |
| Dielectric Strength | AC 1,450V for 1 minute |
| Application | VALTOO |
When using bimetal thermal protector, recommend to choose following wires considering rated current:
| Rated current | ≤3A | ≤5A | ≤7A | ≤12A |
| Traverse area | 0.3 mm² | 0.5 mm² | 0.75 mm² | 1.25 mm² |
| UL wire gauge | AWG22 | AWG20 | AWG18 | AWG16 |
| Rated current | ≤15A | ≤20A | ≤30A | -- |
| Traverse area | 2.0 | 3.5 | 5.5 | -- |
| UL wire gauge | AWG14 | AWG12 | AWG10 | -- |
4. Attentions about KSD301 Bimetal Thermal Protector.
1)The operating temperature of thermostat is tested at the rate of 1℃/ min in the hot air circulating oven. Therefore, when select the thermostat, you can choose the temperature according to your operating conditions. We recommend that you confirm that through both normal and abnormal status.
2) During bimetal thermal protector installation, need high attention that the temperature-sensitive surface should not be deformed, and the top of the cap should not be collapsed or deformed, so as not to affect the temperature performance and electrical performance of the product.
3) During thermal protector using process, need to avoid moisture and pollution, otherwise it will affect the electrical performance of the product. Recommended thermostat working environment is that relative humidity ≤90%, no contact with corrosive and flammable things.
4) During thermal protector using process, need high attention to avoid cracks caused by the large force on the case inside, and liquid penetrates into the thermostat. Keep the case clean to prevent the insulation performance from decreasing or even short circuit breakdown after the thermostat polluted by the conductive medium.
If the picture shows product could not meet your demand, please refer to below KSD301 Thermostat Specification, to find the style you want, or share with us your detail requirements, we will support customized production.
Thanks for your time, please feel free to contact us via below ways,
Sales: Thomas Lee/Julie Liu
Tel: +86 138 6234 1050/+86 180 2126 2273
Mail: lixin@liangqundianzi.cn or ksd301@aliyun.com.cn
WhatsApp: +86 15850802713
