|
[China]
Trade Verify
Address: NO 10,XINGLONG ROAD, SHUANGFU INDUSTRIAL ZONE, JIANGJIN DISTRICT, CHONGQING, CHINA
Contact name:EDISON
Chongqing Cowells Machinery Manufacturing Co., Ltd. |
|
Verified Suppliers
|
|
|
On Road Motorcycle In Zongshen Cb250-G K16 Model
What engines we can use on our Enduro bikes?
Our main engine supplier for four stroke engines is ZONGSHEN, we
use CB250-G (ZS165FMM), CB250-F (ZS172FMM-3A), PR250 (ZS172FMM-5),
CB250-R (ZS172FMM-6), CB-F300 (ZS175FMM-3A), PR300 (ZS175FMM-5),
CBS300 (ZS174MN-3), NB300 (ZS174MN-5), NC250 (ZS177MM), NC250S
(ZS177MM-A), NC300S (ZS182MN), NC450 (ZS194MQ), NC450S (ZS194MQ-2),
all the above engines we can use on our motorcycles, and for each
version engine, we can do both carburetor and fuel injection.
Except four stroke engines, we also have three version 2T engines.
The 1st one is made by Loncin called MT250 based on Yamaha DT model. The 2nd one is made by MLF based on KTM2018 2T 250cc. The 3rd one is made by MLF based on KTM2018 2T 300cc. For 2T engines, now
can only do carburetor, cannot do EFI.
Besides, soon we will have new engines from ZS, its NC250RR and
NX300.
What models we are doing now?
For Enduro models, now we have K16(KTM 2017), K18(HUSQ 2018),
K19(Honda 2016), K20(KTM 2019), K21(KAWASAKI KLX), K22(HUSQ 2020),
K23(KTM2023), Rally 450. Total eight different models. Besides the
Enduro models, we also have different versions of dirt bikes.
What colors we have for the Enduro models?
We have orange, black, white three colors optional. And for other
colors we can do as you need, but the MOQ for other color is
100units.
| Zongshen CB250-G engine | |
| Specification | |
| Vehicle Type | Steel and alloy |
| Engine Type | 4 stroke, air-cooled |
| Engine Model | CB250-G |
| Cylinder Arrangement | Single Cylinder |
| Piston Displacement (cc) | 223cc |
| Maximum Power (kw/r/min) | 12/7000 |
| Maximum Torque (N.m./rpm) | 17.5/5500 |
| Transmission System | Chain drive |
| Ignition Type | C.D.I |
| Starter System | Electric/Kick |
| Transmission | 5 Speed, International |
| L×W×H (mm) | 2170X840x1250 |
| Wheel Base (mm) | 1450 |
| Seat Height (mm) | 885 |
| Ground Clearance (mm) | 250 |
| Dry Weight (kg) | 120 |
| Brake (Front/Rear) | Disk/Disk |
| Tyre(Wheel rim), Front | 80/100-21(1.60-21) |
| Tyre(Wheel rim), Rear | 110/100-18(2.15-18) |
| Fuel Tank Capacity (L) | 9 |
| Engine Oil Capacity (L) | 1.1 |
| Max. Load Capacity (kg) | 150 |
| Max. Speed(km) | 120 |
| Battery | ACID BATTERY |
| QTY for loading | 32 PCs /SKD/20GP |
| 105PCs/SKD/40HC | |
FAQs:
1. Brief introduction of KEWS.
We are manufacturer of different models of motorcycles. We are
founded on year 2005,located in Chongqing,China. Since 2005 to
2015, our main products are cubs, street bikes, dirt bikes. And
from year 2016, we started the production and selling for Enduro
models,and now our main products are MX, Motocross, Enduro bikes,
Super motos,etc. Similar models as KTM, Husqvarna, Gasgas,etc.
Our main engine supplier for four stroke engines is ZONGSHEN, we
use CB250-G (ZS165FMM), CB250-F (ZS172FMM-3A), PR250 (ZS172FMM-5),
CB250-R (ZS172FMM-6), CB-F300 (ZS175FMM-3A), PR300 (ZS175FMM-5),
CBS300 (ZS174MN-3), NB300 (ZS174MN-5), NC250 (ZS177MM), NC250S
(ZS177MM-A), NC300S (ZS182MN), NC450 (ZS194MQ), NC450S (ZS194MQ-2),
all the above engines we can use on our motorcycles, and for each
version engine, we can do both carburetor and fuel injection.
Except four stroke engines, we also have three version 2T engines.
The 1st one is made by Loncin called MT250 based on Yamaha DT model. The 2nd one is made by MLF based on KTM2018 2T 250cc. The 3rd one is made by MLF based on KTM2018 2T 300cc. For 2T engines, now
can only do carburetor, cannot do EFI.
Besides, soon we will have new engines from ZS, its NC250RR and
NX300.
For Enduro models, now we have K16(KTM 2017), K18(HUSQ 2018), K19(Honda 2016), K20(KTM 2019), K21(KAWASAKI KLX), K22(HUSQ 2020), K23(KTM2023), Rally 450. Total eight different models. Besides the Enduro models, we also have different versions of dirt bikes.
Yes, we can do OEM, but we prefer to work for our own brand name KEWS. For OEM our MOQ is 32pcs/20GP, and for our own brand name the MOQ is 1unit.
Our payment term is 30% as deposit to start the production prepare. 70% be paid after finishing the production before loading.
For 1st order, the delivery date is about 60days since the date we receive the deposit, and after 1st order, the delivery date is about 40-45days.
We have orange, black, white three colors optional. And for other colors we can do as you need, but the MOQ for other color is 100units.
The dimension is 1700*460*850MM for each unit.
32pcs/20GP, 105pcs/40HQ.
We will offer 24hours*7days online feedback to help you solve all the quality problems. And we can offer all the spare parts for the bikes you buy from us, include the engine parts.
