Active Member
|
[China]
Address: Xunmei Industrial zone, Fengze district, Quanzhou 362000 Fujian China
Contact name:Kelvin
QUANZHOU RUIDA INDUSTRIAL AND TRADE CO.,LTD |
|
|
Our diamond wire with pre-sharpened sintered diamond
beads (cobalt bond with good quality diamond from Ijin South
Korea), diameter 10.5mm, 40beads per each meter, assembled with
vulcanized rubber and reinforced with flat spring between beads,
which achieves to average cutting speed @1.5-2.5m2 per hour with
good balance of lifetime @ 2-4m2 per each linear meter wire, for
all-around cutting applications of concrete and flint concrete with
heavy steel reinforced in construction industry. The same above
diamond wire is regularly supplied to our customers and partners
from USA, United Kingdom, Germany, Sweden, Russia, Ukraine, Brazil,
Chile and so on, due to the competitive quality with optimized
balance between performance and cost.
Application 1: For cutting the road base or bridge (Concrete: C50; Density of
steel 3-5%, Diameter of steel: 12mm screwed)
Cutting speed: 3-5M2/Hour
Cutting life: 4-5M2/LM
Application 2: For the railway bridge (Concrete: C50; Density of Steel: >5%;
Diameter of Steel: 32mm screwed, twin lines with 10cm distance)
Cutting speed: 2-3M2/Hour
Cutting Life: 2.5-3M2/LM
Application 3: For the Highway (Concrete: C50; Density of Steel: >5%; Diameter
of Steel: 25mm screwed, twin lines with 15cm distance)
Cutting Speed: 2-3M2/Hour
Cutting Life: 4-6M2/LM
Photos of working site:
Technical Data:
Wire Saw for Concrete/Reinforced Concrete/Steel Pipe:
| APPLICATIONS | Art No | Specification (mm) | Beads/M | Reinforcement |
| To be widely used for cutting concrete, reinforced concrete and steel pipe | ROC-C115R | ¢11.5×6.5 | 40 | Rubber+Spring |
| ROC-C110R | ¢11.0×6.5 | 40 | Rubber+Spring | |
| ROC-C105R | ¢10.5×6.5 | 40 | Rubber+Spring | |
| Cutting Material | Linear Speed (M/S) | Cutting Speed (M2/H) | Cutting Life (M2/M) | |
| Normal Concrete | 25-28 | 3-5 | 3-7 | |
| Reinforced Concrete | 22-25 | 1-3 | 1-3 | |
| Steel Pipe | 18-20 | 0.5-1 | 0.5-1.2 | |
| SPECIFICATION OF BEADS | Out Diameter | Length of work layer (mm) | Bead Length | Manufacture Tech |
| ¢11.5 | 6.5 | 11 | Sintered | |
| ¢11.0 | 6.5 | 11 | Sintered | |
| ¢10.5 | 6.5 | 11 | Sintered |
