|
[China]
Trade Verify
Address: Zone B, Lianhua Industrial Park, Kapa Road, Pingxiang City, Jiangxi Province, China
Contact name:Aimee
Jiangxi Kapa Gas Technology Co.,Ltd |
|
Verified Suppliers
|
|
|
7.5KW / 10HP 0.68m³ / min 16Bar High Efficiency Industrial Air
Compressor
Description
More stable, no mechanical transmission failure: high-fficiency
permanent magnet synchronous motor and screw male rotor adopt
embedded-integrated shaft direct connection,structure, no gear
transmission, completely eliminate gear pitting or broken teeth;
Two independent permanent magnet motors are integrated directly
drive two air ends, no coupling failures.
More energy efficient, the air end is always running at
energy-saving speed.
More efficient and fficient permanent magnet motor + no
transmission efficiency loss.
More compact: The permanent magnet motor is small in size and the
integrated structure saves space.
More comfortable, low running noise, eliminating three sources of
noise: no-click bearing noise, no gear meshing noise, no coupling
drive noise.
Under the set frequency conversion pressure, the unit will
automatically adjust to keep the output pressure within 士0.1 bar,
reducing unnecessary waste (the power consumption increases by 7%
for every 1 bar of pressure increase).
Model | KB7.5KW-1.6/YC |
| (M³/Min/Mpa) | 0.68/1.6 |
| Power Kw/ HP | 7.5KW/10HP |
| Ambient Temperature ℃ | 2℃-45℃ |
| Cooling Mode | Air Cooled |
| Discharge Temp | ≤Ambient +15℃ |
| Noise Level Db(A) | 65 |
| Driven Mode | Direct Drive |
| Power (V/Ph/Hz) | 380V/3Ph/50Hz or customized |
| Starting Mode | VFS |
| Dimension (mm) | 900*650*870 |
| Net Weight (kg) | 155 |
| Out let Diameter (inch) | RP1/2 |
⊙ Schematics
| 1. Air Filter | 9. Oil Temperature Control Valve |
| 2. Air-in Easing Value | 10. Oil Filter |
| 3. Principal Screw Machine | 11. One-way Shut-off Valve |
| 4. Oil Air Separator | 12. Pressure Gage |
| 5. Oil Air Separating Filter Core | 13. Safety Valve |
| 6. Minimum Pressure Valve | 14. Vent Valve |
| 7. Radiator with Aluminum Alloy Fans | 15. Compressed Air Dry Separator |
| 8. Return Check Valve | 16. Motor |
why choose us
Longer service life of the master machine
The rotor uses asymmetrical line running at a low speed with the
support of the ball bearings and roller bearings as a result. The
damage and the cost are lowered and the service life is extended.
Some force is counteracted by the axial force generated by the
bevel gear. So the load on the bearings of the master machine is
lowered.
Permanent alignment of the electromotor and the master machine
Different from the strap compressor, the SRC series compressor can
integrate the electromotor with flange, shaft coupling box-gear
box. and the master machine into one in such way the master machine
and the electrometer are aligned forever in the transpiration. The
SRC series compressors equipped with effective and fully sealed
air-cooling electromotor.
